PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14173
Results: 14173
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 40PFL8605D/78 | Dead | Ray | Replace u101, d301 | felipe |
PHILIPS | 29PT5642 | Twisting image after changing the flyback for an mxt or fbt | Image becomes distorted when white parts with high contrast appear | Remove the ferrite from the original flyback and place it in the mxt or fbt | Eletrônica Solar |
PHILIPS | 21PT8467/78 | Mute / vertically closed / 5 centimeters at the bottom and top | Eeprom-24c16wp | moreno-pirat. | |
PHILIPS | 20GL1345 | TV turns off quickly after turning it on, sometimes it doesn't even turn on | Q7537 (f423) near fly with small leak | zé apolonio | |
PHILIPS | 21PT9467C SK4.1L | 3 colored lines appear at the top of the screen | R 358 220Ω/2w | Note that the 21pt9467 scheme is different from the 9767c in the other scheme the position is r304 | JOSÉ GUSMÃO |
PHILIPS | 32PFL3404 | Dark image (even more so in the center) | Replacing the power supply board | robson | |
PHILIPS | 20PT3331/78 | Turning off. | Solution: adjust fly back screen | BARRETO CRUZ | |
PHILIPS | 14 PT 3131/78 | No sound (Audio) | Solution: check ci - an 7523 n and components around it, if ok! d e s a c t i v a r c - 2908 (4.7uf/50v) | BARRETO CRUZ | |
PHILIPS | 14 PT -3131/78 | Vertical closed at the top of the screen | Solution: change c - 2444 (470uf/16v) c - 2446 (470uf/16v) c- 2465 (10uf/160v) | BARRETO CRUZ | |
PHILIPS | 20 PT 3331/78 | Turning off | Solution: adjust the flyback screen. | ||
PHILIPS | 14 PT 3131/78 | No sound (Audio) | Solution: check ci - an 7523 n and components around it, if ok! d e s a c t i v a r c - 2908 (4.7uf/50v) | ||
PHILIPS | 14PT - 3131/78 | Vertical closing at the top of the screen | Solution: change c - 2444(470uf/16v) c - 2446(470uf/16v) c- 2465(10uf/160v) | ||
PHILIPS | 29PT5642 | TV turns off by itself, sometimes it takes a while to turn off. | Cold solder on the flay-back pin that is connected to ground. | Soldered and ready. | Armando,EletrnicaEvoluSom. |
PHILIPS | 29PT5645 L0401L | The power is high but the filament does not turn on, in 5 seconds it turns off | Shorted tube | Replace the tube | cleberlima |
PHILIPS | 21PT5433/78R | Turns on with the image a little blurry and then immediately. | I changed the socket, it improved but the image continued with blurred colors and kept turning off, so I checked that the filament voltage was low, I changed the r3444 and r3443 and it returned to normal. | Replace r3444 and r3443 and check 2444 | dodim |
PHILIPS | 14PT316A | Doesn't start | Change fly back, it turned on but with a hoarse sound, also change potentiometer 3540 adjustment +b leave the adjustment at 95 volts... | pfa | |
PHILIPS | 29PT4635 | Doesn't start | Shorted horizontal output transistor c4455 47mf exhausted | Replace horizontal output transistor and c2455 | juci |
PHILIPS | 20PT3331 | Dead | Bul 312 | preá | |
PHILIPS | 14PT4131 | Stretched image when adjusted in service mode and turned off to store but stretched back | Replace epron 24c16wp | macedo domingos | |
PHILIPS | 14PT112A | TV turns on in drizzle without OSD keys stuck does not accept remote control commands | R3677 connected to pin 33 of the micro | Replace r3677 | Roberto Consertos |