Search: PHILIPS
Results: 14173

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPS14PT 3131
No soundC2444 of 470 x 16vReplace with another.Elias Alves, Eletrônica Modelo.
PHILIPS21PT9467C/78
Image folding at the bottom of the screenCauses changed r310FERNANDO ROCHA CENTER ROCHA
PHILIPS29PT5642
Turns on with 3 colored stripes and then turns off / no plotDiode 6457 - bas316 - shorts outReplace bas316 diode with 1n4148 - also replace cap.2465 10/250eletronicaapolo
PHILIPS29PT458A
Turns off immediately after turning onFuga no transistor 7461(bc337)sliva
PHILIPS20PT222A/78R
It doesn't turn on, it's just a noise from the speaker like knock, knock, knock.C 2447 brokenI replaced it and resolvedezequel de andrade
PHILIPS20PT4331
League with no image and no soundR3441 3443R3441,3443 openELETRONICA MAURI JUNIOR
PHILIPS20PT222A
After a while on, a strip appears from left to right and turns offD 6461 e d6464 1n4148, c2469 390 , c2462 4k7BEIVIDAS SERVICE
PHILIPS21PT9467C/78
Vertical closed half of the screen at the top with three colored bandsD 351 openI replaced the diode that was open and took advantage and immediately replaced the capacitors.DIGITEC ELETRONICA Lambarí D'oeste -MT
PHILIPS14PT4131
PT
The customer dropped the TV. and she was silentIt was very difficult to find the defect. It looks like a crack moving the plate and the sound came back but it wasn't the plate. it was a capacitor. smd. on pin 31 of the ci. all. terminal cracked. c2201- c2202 ok.C2201 c2202 good luckThis email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPSFWM 208/78
Does not recognize pen drive, and there is no sound on the CDC.i 5v regulator openIc 103, also replace ic u2ELETRO CENTER
PHILIPS20PT120A
With thick lines at the top of the screen, in vertical deflection.Broken r3407 terminal.Replace r3407 (220 ).Ademir tc
PHILIPS29PT9467C
Fly backBsc27-n2291 is the same as bsc29-0135zThis email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS29PT8422/78
Turns on, as soon as the blue screen appears, it turns off33v zener diode near varicap, replace without measuringDz 6001animal caverna
PHILIPSFWC270
There is no audio and low audioBc847b smd position 7302 with measuring leak direct exchangemacceletronica
PHILIPS14PT3336/78
When turning on horizontal risk (closed vertical) and turns offR3448= 1r openJust replace it for another one like itPaulo Sertel Itararé SP
PHILIPS29PT9467C
No blue, possible tube defect! but because of the tube, the following components burned out: r910, r917, r918, r924, r919, c904 and q905Reactivate the tube at low level and replace the following components, r910 22homs, r917 1k2, r918 1k, r924 180homs, r919 56homs, c904 100k, q905 a1015Replace them and everything is okFernando eletrônica
PHILIPS21PT9467/78
SK4-1L
When turned on, it triggers protectionFilter capacitors c628, c630.CACER69
PHILIPSFW M377
I'm hereSem st-by 1v5= 0v em pino 13 d0 stk403Q727 bc556 e r795 22k smd replacevitaltec
PHILIPS29PT554A/78R
HC070263
It turns back on to standby, sometimes it turns on with a white stripe and RGB lines at the top, sometimes it turns on with a small image in the center of the screen, or it turns on with a white globe in the center and turns off when tapped on the board...I resoldered the ci7401 it seemed to be well solderedBOBY
PHILIPS29PT5642
Turning off with banner at the bottom of the screenC2242 100nf change without measuringSIDNEY ALVES