PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14174
Results: 14174
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 20GL 1045 | Luminance- obs: missing 180 voltsna r-3700 of 470 hms. | Trcar r-3550- 3,3 hms | jaironuness | |
| PHILIPS | 21PT1353/00 L 6.2 | Difficulty tuning, no color and sound | Adjustable coils (5100) | Adjust but replace | J.CUNHA |
| PHILIPS | 14PT1352/00 L 6.1 | Out of tune | Adjustable coils (5100) | Replace with new | J.CUNHA |
| PHILIPS | 29PT4641/78 | Vertical only opens the bottom part of the screen. | Replace diodo ( d 6457 smd ) | dony eletronika | |
| PHILIPS | 14PT3005 L03.2L AA | Upper line is protected. screen | C2460 devalued 0.068 | Replace c2460 r 3446 1 homs | ELECTROFRIO |
| PHILIPS | 14PT3005/44 L03.2L AA | 3 upper vertical stripes (r-b-g). screen | C 2460 0.068 | Replace c2460 | ELECTROFRIO |
| PHILIPS PLASMA | 42PF7320 | Dead | Chap. c 8059 and c 8060 replace the two | DEBIQUE | |
| PHILIPS | 21PT5437/78 | Dark screen with normal osd | Open resistor | R3442 120k was placed 100k | NELSON |
| PHILIPS | 21PT5437/78 | Dark screen with normal osd | R3442 | NELSON | |
| PHILIPS | 21PT9467/78 *** | Remote control and keyboards do not obey (message in the left corner of the factory screen) | Data loss | Ic-101 eepron 24c08 replace e pronto. | jose wagner |
| PHILIPS | 29PT5642 L04U AA | When turning on stand by the power supply keeps pulsing and does not start horizontally. | Leaky coupler photo | antonio | |
| PHILIPS | 29PT4631 | Turns on and off after a few seconds | Replace the two bc's 327 and 337 with bd135 and bd136 | And the note dies | AdrianChapadão |
| PHILIPS | 29PT5642 | Don't Start | Photo opening 7513 direct exchange | ||
| PHILIPS | 29PT4635 PV1913916 | When the TV was turned on, the power supply kept pulsing but it didn't arm, | The bu 4508dx was burned out, I replaced it but the TV continued to have more problems, when turned on it turned off in 3 seconds. | I went to the extreme and found the defect was the electrolytic capacitor c2455 which is located close to two transistors which were also bad (7461-c337)-7463-c 327. Then the TV went fileeeeee | This email address is being protected from spambots. You need JavaScript enabled to view it. |
| PHILIPS | 21PT230 | After turning on the TV, it returns to standby mode. | Electrolytic capacitor 2551.47mf/160v, without capacitance. | juares | |
| PHILIPS | 14GL1014 | No sound image disappearing. | Exchanged ci | ransabom | |
| PHILIPS | 29PT4631 | The power supply relay engages and then opens. | Diodo zener 6541 de 10v(smd) com fuga. | Persio | |
| PHILIPS | 20PT3331 | Dark stripe right side horizontal direction | Delete r 3403 | paulo artur rio de janeiro | |
| PHILIPS | 21PT8467 L031L | Horizontal output heating up, noise in the horizontal oscillator, then tripping. | Replace r 3445 from 1 open r | miro maciel | |
| PHILIPS | 29PT4635/78 | After a while it was on, it would make a hissing sound in the flay's cup and then turn it off by itself and not adjust the screen. | I changed the flay and capacitors close to the flay circuit and it solved the problem | kbça |