PHILIPS TV Repair: Common Faults and Solutions.


AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HISENSE
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: PHILIPS
Results: 14174

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPSFL2.16
Noise in sound. (also without antenna signal).Check ic7680 (tda8425v7; 4822 209 63734).
PHILIPSFL2.16
No tuning when set is cold.All supply voltages ok? check tuner: fq916me/if; 4822 210 10548 fq916mf/lif; 4822 210 10558 fq944/lif; 4822 210 10556 fq916dme/b; 482
PHILIPSFL2.16
No sound, "on, standby, i" leds blinking10mhz crystal 1602 on the ssp defective, 4822 242 80276
PHILIPSFL2.16
No pip only pip-osd.No output from sync ic7410 (sda9086-5) on pip panel? replace ic7410; 4822 209 63644
PHILIPSFL2.16
No picture, sound ok.Check ic7707 on ptp (tda6111q3y; 4822 209 33365).
PHILIPSFL2.16
No picture only txt and menu.Check ic7395 (tda8443b; 4822 209 30394).
PHILIPSFL2.16
No picture after some time. sound ok. control works very slow.Check ic7231 on lfr box (78l05; 4822 209 72042).
PHILIPSFL2.16
No colour after 30 minutes, pip not synchronised.Check soldering of collector t7014 (bc858b) on digital scan box
PHILIPSFL2.16
No colors in tv modeCheck ic7365 (tda4650) on the ssp (4822 209 30837)
PHILIPSFL2.16
Negative pictureCheck ic7207 on lfr box (sda9205-2; 4822 209 31056).
PHILIPSFL2.16
ModificationsModifications ------------- only for 29" picture tubes: from production start onwards following items have been changed on the large signal panel: c2603 changed into 220nf (4822 122 32927) c2626 added 3,9nf, parallel to r3633 (4822 12
PHILIPSFL2.16
ModificationModification ------------ only for 25" during production in week 9405 the picture tube of the 25" sets has been changed from the a59eak252x43 (4822 131 20501) into a a59eak252x44 (4822 131 20602). this new picture tube is used in sets with serial number
PHILIPSFL2.16
ModificationModification ------------ only for 29" picture tubes from production start onwards on the large signal panel item c2611 has been changed into 1 uf 50v (4822 121 51319).
PHILIPSFL2.16
Low frequency hum from subwoofer, buzz from right hand squeeter.Check dc level on pin 1 and 9 of ic7011 (tda1521). if not correct, replace (4822 209 63913).
PHILIPSFL2.16
Low brightness txt and osd, picture okIf this condition occurs, check the option codes. resetting the option code numbers as per the service manual provided the cure.
PHILIPSFL2.16
Jumping vertical picture. wrong colours. sometimes no sound.Set is switching between pal-ntsc-secam. check soldering joints of t7119.
PHILIPSFL2.16
Jitter at ntsc reception.Replace item 9459, connected to pin 13 of ic7400 on the lsp, into 220Ω (4822 116 52215). remarks : introduced in production in week 9335.
PHILIPSFL2.16
JitterIn pip unit change the value of r3336 to 4k7.
PHILIPSFL2.16
In pip picture only white stripes.No +12b supply. check r3345 (22Ω; 4822 111 41424) and ic7755 (tda2579b; 4822 209 63423).
PHILIPSFL2.16
Humm from speakers. menu vibrates.Check d6551(llz-c5v6; 4822 130 80954).