PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14173
Results: 14173
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | CP90 | Field bounce | Tda2579 timebase gen chip | ||
PHILIPS | CP90 | Dull pic when connected to normal mains - ok with isolated supply | Crt rimband come adrift | ||
PHILIPS | CP90 | Does not start by using remote control | Transistor 7730. better memory battery 1901, 2,4 v- code 4822 138 10313. | ||
PHILIPS | CP90 | Does not function | Voltage +95 v not present check/replace ts 7677 (but 11 af; 4822 130 42679), check/replace ts 7673 (bc 547; 4822 130 44257) and ts 7674 (bc 328; 4822 130 44104) and replace d 6674 by byd33j (4822 130 42606) check/replace ts7727 (bc556; | ||
PHILIPS | CP90 | Dead. | R3668 ( 15r ) o/c. | ||
PHILIPS | CP90 | Dead. | C2695 ( 2.2nf ) , d6695 s/c. | ||
PHILIPS | CP90 | Dead. | C2679 ( 1nf 2kv ) , d6679. | ||
PHILIPS | CP90 | Dead. | 1.6amp fuse o/c , check for drys on loptx ect. | ||
PHILIPS | CP90 | Dead with pulsing psu - the 95v ht low at 60v | D6702 bzx79-f6v2 zener leaky | ||
PHILIPS | CP90 | Dead with faint whistle | Pri ht ok, no ht at loptr; c2619 1n5 2kv burnt & s/c | ||
PHILIPS | CP90 | Dead with faint whistle | Ok on dummy load. but11af loptr s/c - dry joints on chopper tfmr & loptx | ||
PHILIPS | CP90 | Dead set - no st/by led or chan ind | Check for osc at pins 31 & 32 tmp47c432 micro ic7840. if absent check c2934 & c2935 27pf leaky | ||
PHILIPS | CP90 | Dead psu working pulsing | D6610 s/c r3600 o/c d6072 ( 6v2 ) zener ( if no start up v at junction r3661 r3673 cnx62 u/s ) | ||
PHILIPS | CP90 | Dead power supply ok no 6v on micro ic | D6733 oc | ||
PHILIPS | CP90 | Dead no st/by - 95v/22v present | O/c print near m13 plug/skt | ||
PHILIPS | CP90 | Dead no 19v rail f1690 o/c | Ic1701 tda8190 | ||
PHILIPS | CP90 | Dead ht rises , dies instantly | R3665 , d6665 4r7 and in4148 | ||
PHILIPS | CP90 | Dead h.t. low 50v | Check d6610 if ok suspect lopt | ||
PHILIPS | CP90 | Dead but ok on dummy load with ht at 95v | C2703 330ยต 25v leaky | ||
PHILIPS | CP90 | Dead , no stby led or chan ind , check for osc at pi | C2934 - 2935 ( both 27 pf ) |