PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14173
Results: 14173
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | ANUBIS-S | Mains fuse 1500 fails constantly | In case the mains fuse of a 25" anubis s bb set constantly blows, it is recommended to upgrade it to a 4a type: change fuse 1500 to t4a 4822 070 34002 also update the text t3.15a on the service printing to a sticker with the text t4a. remarks | ||
| PHILIPS | ANUBIS-S | Lock-up problem during program change; error message 6 & 7 on screen | Change r3198 into 560e - 4822 051 10561 remarks : problem behaviour: after pressing first digit, first digit appear on the screen. no further digit can be inserted. the program will stay as previous selected. the digit will disappear after 30-45 | ||
| PHILIPS | ANUBIS-S | Line output transformer 4822 140 10486 is no longer | Line output transformer 4822 140 10486 is no longer available ------------------------------------------------------------- only for 21" anubis s bb/14" anubis s cc lot 4822 140 10557 can be used as a substitute. however c2450 has to be changed from 560n | ||
| PHILIPS | ANUBIS-S | Line output failure | Check line transistor ts7445 (4822 130 60851) if ts7445 defective, by then also replace c2445 by 680 pf 2kv 4822 126 12269 c2446 by 5n6 2kv 4822 121 70355 c2447 by 680 pf 2kv 4822 126 12269 remarks : introduced in production week 9323 | ||
| PHILIPS | ANUBIS-S | Interference in band i | A. for all 14" sets and 20"/75/79 and 21"/75/79 sets replace up ic7600 by pca84c844p/110 (4822 209 32927) b. for all 14-20-21" sets add bead (4822 526 10606) between anode of d6530 and d6531 (at the secondary side of the ffs transfor | ||
| PHILIPS | ANUBIS-S | Install or store not possible; sound volume might be too low | Check whether "hotel mode" is disabled. to check this, see "frequently asked questions", "how to de-activate "hotel mode". | ||
| PHILIPS | ANUBIS-S | Ic7225 does not start up. | Solder 3 x bat85 (4822 130 31983) on copper side of the main carrier. cathode pin 41 ic7225 anode ground cathode pin 43 ic7225 anode ground cathode pin 36 ic7225 anode ground make bare ends as short as possible and isolate with a sleeve remarks | ||
| PHILIPS | ANUBIS-S | How to deactivate "hotel mode" | Applicable for family: pll sets for dd sets identification on up: hotel mode can only be de-activated if the software for hotel mode is available (so an "h" version) and when the hotel mode option (address 246) is enabled. only 1 hotel mode is possible: | ||
| PHILIPS | ANUBIS-S | How to de-activate "hotel mode" | Applicable for family: vst sets for dd sets identification on up: hotel mode can only be de-activated if the software for hotel mode is available (so an "h" version) and when the hotel mode option (address 246) is enabled. two hotel modes are possible: | ||
| PHILIPS | ANUBIS-S | How to deactivate "hotel mode" | Applicable for family: pll sets for aa/bb/cc sets identification on up: hotel mode can only be de-activated if the software for hotel mode is available (so an "h" version) and when the hotel mode option (address 246) is enabled. only one hotel modes is p | ||
| PHILIPS | ANUBIS-S | How to de-activate "hotel mode" | Applicable for family: vst sets for aa/bb/cc sets identification on up: hotel mode can only be de-activated if the software for hotel mode is available (so an "h" version) and when the hotel mode option (address 246) is enabled. two hotel modes are possi | ||
| PHILIPS | ANUBIS-S | How to activate "hotel mode" | Applicable for family: pll sets for dd sets identification on up: hotel mode can only be activated if the software for hotel mode is available (so an "h" version) and when the hotel mode option (address 246) is enabled. only 1 hotel mode is possible: ho | ||
| PHILIPS | ANUBIS-S | How to activate "hotel mode" | Applicable for family: vst sets for dd sets identification on up: hotel mode can only be activated if the software for hotel mode is available (so an "h" version) and when the hotel mode option (address 246) is enabled. two hotel modes are possible: hot | ||
| PHILIPS | ANUBIS-S | How to activate "hotel mode" | Applicable for family: pll sets for aa/bb/cc sets identification on up: hotel mode can only be activated if the software for hotel mode is available (so an "h" version) and when the hotel mode option (address 246) is enabled. only one hotel modes is poss | ||
| PHILIPS | ANUBIS-S | How to activate "hotel mode" | Applicable for family: vst sets for aa/bb/cc sets identification on up: hotel mode can only be activated if the software for hotel mode is available (so an "h" version) and when the hotel mode option (address 246) is enabled. two hotel modes are possible | ||
| PHILIPS | ANUBIS-S | Horizontal flashing lines across picture in vhf 1 at certain volume | At the stereo playback panel (diagram g anubis s aa manual 4822 727 19707 in gb and 4822 727 19719 in e) it is recommended to: add 2n2 10% 50v (4822 122 33531) at junction 2893/3891 and pin 2 s18 add 2n2 10% 50v (4822 | ||
| PHILIPS | ANUBIS-S | Geometrical distortion at teletext reception | In case of some degree of distortion at teletext reception, it is recommended to: change r3828 to 1k 5% 0.25w smd 4822 051 10102 remarks : sensitivity of the horizontal deflection can be effected by different beam current, especially a | ||
| PHILIPS | ANUBIS-S | For all anubis-s aa (pv2) sets failure of ic7400 | For all anubis-s aa (pv2) sets failure of ic7400 frame deflection after protection --------------------------------------------------- if ic7400 is damaged after an activation of the internal protection circuitry inside ic7400 it is recommended to: add | ||
| PHILIPS | ANUBIS-S | Failure on line output transistor ts7445 (2sc379x) | In case of failure of the line output transistor ts7445, it is recommended to adapt the circuitry as follows: for 14" anubis s aa sets: * change ts7445 into bu1508dx (4822 130 63569) * delete r3445 * change r3444 into 4k7 5% | ||
| PHILIPS | ANUBIS-S | Failure on line output transistor ts7445 | In case of a failure on the line output transistor ts7445 in anubis s cc, it is recommended to adapt the circuitry as follows (see diagram a page 7 service manual anubis s cc) (gb 4822 727 20288 and es 4822 727 20289) * delete scan protection panel * cha |