PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14171
Results: 14171
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | A10 28PW6305 | No r/c - front controls ok | Ir preamp rec, cct ref no.1002 on small sub panel at front of set. seme part no. 9322 1275 4667 only 750mv p.p. at pin 3 of the panel with painter i.c. on, should have been 3.3v p.p | ||
PHILIPS | A10 28PW6305 | Child lock removal | Press menu / features / child lock & turn off. if parental control has been activated (locking out certain chans or locking the set) then enter a pin. if not known then enter 0711 twice to gain access. you can then change no.or turn funct off. | ||
PHILIPS | A10 | Service mode entering | Enter 062596 then "menu" | ||
PHILIPS | 9CM0 | Flickering. | Add pvc tape under multipole unit clamping ring on crt. | ||
PHILIPS | 5GFL2.30E AA | Dead aft storm - led green for 40secs then red | Fss supply not working - fit fss supply kit - includes module pt no 4822 310 32214 | ||
PHILIPS | 52ZY3535 ANUBIS B AA | No pic, sound ok with faint burning smell | No filed - replace overheated r3452 4r7, r3450 3r9 & ic7400 tda3653b | ||
PHILIPS | 4CM4270 MONITOR | Dead 190v rail low | Change t5612 first , before lopt!! | ||
PHILIPS | 48UP91 | Picture is blurred and looks washed out | Check for dirty mirrors! | ||
PHILIPS | 41GR884 PROJ | Shuts down aft couple of secs | Prot cct on due to r3818 180k o/c on conv/prot board | ||
PHILIPS | 3LC2050 -LCD | No tv sound | Audio in at pin 13 ic71 µpc1416g sm chip but nothing out at pin 14 - chip faulty | ||
PHILIPS | 3LC2050 -LCD | No sound tv or radio | R120 10r sm res | ||
PHILIPS | 3D | Voltage +140v is present | Replace ts7618 (2sd1577ph; 4822 130 43921) | ||
PHILIPS | 3D | Tuning unstable | Replace u 1018 (4822 212 22439) | ||
PHILIPS | 3D | Tuning does not function | Check tuning voltage on pin 15 ic 7848. replace ic 7848 (mea 2901/07; 4822 209 72127) u 1008 | ||
PHILIPS | 3D | Tuner uv618/6456 | Tuner uv618/6456 ---------------- the tuner uv618 (4822 210 10304) is no longer available. for 3d sets please order 4822 210 10593. | ||
PHILIPS | 3D | Text does't function | Check u 1555 (digital pcb; 4822 212 22585) | ||
PHILIPS | 3D | Sometimes no synchronization | Replace ic 7280 (dpu 2540; 4822 209 72138) on u 1555 | ||
PHILIPS | 3D | No picture. after using txt picture o.k. | Rgb switch in wrong position (external switch) | ||
PHILIPS | 3D | No 140 v | Remove connector m17; voltage + 140 volt is present. replace ts7618 (2sd1577ph; 4822 130 43921) | ||
PHILIPS | 3D | No 140 v | Remove audio output stage (pas) u1003, +140 volt is present. replace ic7200, ic7210 (tda1514/n4; 4822 209 70938). also mount 2 diodes p4ke30c700 (4822 209 73095) in parallel to c2228 and c2229 (polarity is not important) |