PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14168
Results: 14168
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 32PFL3403/78 | Turns on standby when activated on the control, turns on and then turns off | Defect in the backlight board, the TV turned on and off and went into protection | Replace of 680μF 35v capacitors c2 and c3. and f1 8a fuse | Multimídia |
PHILIPS | 40PFL3605D | With sound without image | 750k resistor replacement | Signal board close to the 2j30 ceramic capacitor behind the board | ajm |
PHILIPS | 32PFL3707D/78 | It doesn't turn on, it has 12v and 24v, but the 5v was oscillating and with 4v | Cap 9111 does not appear to be defective but I replaced it and it worked | Replace cap9111 330μF/16v | Eletronica alvorecer |
PHILIPS | 20PT326A/78R | Stand-by LED flashes 4 times, but the TV does not turn on.c | C2551 | Paulo lopes | |
PHILIPS | 32PFL3404 | Turns on and then turns off, lamp does not light | Bad lamp power supply relay | K1 relay with internal contact insulation | Eletro Center |
PHILIPS | 21PT6456 | The TV does not turn on, the + 115 volts oscillating between 60 and 80 volts | Defective photocoupler, just change it and the TV works again | Flavio Aragão | |
PHILIPS | 14GL1015/78 | Image squeaking a lot | 560k resistor position 3965 change to 100k | Replace the 560k resistor r3965 with a 100k one and the sound is normal. | MARCONES DE ARARIPINA PE. |
PHILIPS | FWP2000X | Cutting the bass and treble in the bass potentiometer, the current varies from 2.9 to 1.2v that goes to the micro. | Cap c56 e c40 | You can leave them without them. | guinga (sdia goias) |
PHILIPS | FWP2000X | Volume increasing and decreasing by itself, | Defective capacitors. at the foot of the manual volume potentiometer | Chapter 92 and chapter 93 | guinga (sdia goias) |
PHILIPS | 42PFL5332 | Flashing blue LED and won't turn on | Photo coupler circuit | Replace u401 - u402 - d427. all shorted. | Antonello |
PHILIPS | 40PUG6300 TPM15.7L | Does not turn on (nor LED) | D9311 (sk510c) shorted | I couldn't find it to buy the original diode, I used the rl206 diode instead | Maurlio |
PHILIPS | 48PFG6110 | Does not turn on off or stand by | Short diode d9311, sk510c | JOHN GAMES | |
PHILIPS | 14GL1013 | Device does not turn on the power supply | 22k resistor 3501 near tr 7502 feeds 0.5v received from 70va | Replace, it was just cool, collaborate friends, may God bless us.. | jrezende |
PHILIPS | 29PT8568S | I'm sound | Capacitor c627 1000ufx25v | j.bosco | |
PHILIPS | FWP2000 | Defect connected to the normal radio when connecting to the usb or cd it went to the demonstration and turned off | Replace the c729 close to the ci706 c 10nf25 for 10nf50 | Just replace c729 | jose raimundo rodriques |
PHILIPS | 21PT5435/78 | No audio | After a lot of struggle, I got a tip sound, the 2444 470x16v | Replace and that's it! thanks for the tip. | ELETRÔNICA CAVALCANTE MARTINÓPOLE-CE |
PHILIPS | FP9400 | Low sound | See capacitors 2257 and 2258, both 47uf x 25v | ADEMAR | |
PHILIPS | 32PFL3404/78 40-IPL32L-PWG1XG | Dark screen in the center and blue on the side edges | Change capacitors 25 and 26, both 47p, close to ci 11 on the power supply board. | lucinei | |
PHILIPS | 21 PT5432 | Swinging vertically green screen and disconnects ci of the kinescope board loose pins resolder and replace c 2200 25 volts at the power supply | Electrola 2200 25 vlt | luiztvsom | |
PHILIPS | 42PFL6007G | With sound without image with backlight ok and giving small blinks in the lighting | Short defect in the screen killing the t-con voltages | T-con fhd tm120 ver 0.3 voltages with the screen flats disconnected vin 12v9, hvdd 8v37, vcc18 1v83, vcore 1v81, vdd 16v71, vgh 26v94, vgl -4v95, vconl_fb 7v34 | BRUSKE |