Search: PHILIPS
Results: 14168

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPSANUBIS 2
Jagged image (see train1).Check diode 6441. * 02jan2001 roberto sp353 *.
PHILIPSANUBIS 2
Poor contrastCheck capacitor 2462 (100nf). * mai95 ctr *. see open resistor 3460. * 13jan97 anc *.
PHILIPSANUBIS
Volume doesn't go downWrong integrated microprocessor (7600), it should be anbr 500 m11. * Jul 95 jpba *.
PHILIPSANUBIS
Vertical deformed compressed partsIntegrated 7400. * nov 95 anc *.
PHILIPSANUBIS
Vertical with little amplitudeDeflector unit. * 13dec95 jpba *. r3411, 3412, c2402. *18Sep98 h.desk*
PHILIPSANUBIS
Vertical opens slowly.Check regulator 7218. * 15oct97 jpba *.
PHILIPSANUBIS
Voltages above specifiedHigh vo see 2512 (1uf) open. Sep 94 anc. 3511 resistor (24k) changed. * 02Oct96 jpba *.
PHILIPSANUBIS
Voltage oscillating (pulsating).Resistor 3530 (3.3e) open. * 15jan96 anc *. coil 5523 (4.7uh) open see also resistor 3513 (12e) in the module. * 26Feb96 anc *.
PHILIPSANUBIS
Green fabric3741 resistor on the trc board. * Aug 95 ctr *.
PHILIPSANUBIS
Screen half dark or noisy.Capacitor 2446 open. *dec 94 egs*.
PHILIPSANUBIS
Dark "black" screen (see also bril4).Ic 7400, this occurs due to the increase in the dc level of the line sand castle. *rat out 95 anc*. check TRC board resistors 3707, 3717 and 3727; possibility of being open. * Aug 95 ctr *. resistor 3209 (12Û) open, vert 3211 (330Û) and
PHILIPSANUBIS
Intermittent sound (crashes, hiccups).Ver solda do resistor smd 3801 (2k). * 20dez95 ctr *.
PHILIPSANUBIS
Distorted or noisy sound.Resistor 3801 com solda fria, no decoder. * out 95 mjs *.
PHILIPSANUBIS
Squeaky soundIntegrated 7225. * ju 95 ctr *.
PHILIPSANUBIS
Low sound.Check the possibility of being in hotel mode, if not check programming table error. * 10jan97 anc *.
PHILIPSANUBIS
Just tune in to channel 2.Open 3650 resistor (there is no 33v). *may 95 jpba*.
PHILIPSANUBIS
I only exit STBY using the channel keys. (not on/off)Check vo adjustment (95v), when high it activates the protection, if it is ok (+95), it may be a change in the line protection 95 in this case see resistors 3560/3561(56Û), 3562 (470Û); diodes 6562 (4v7), 6618 (9v1), 7636 (bc548). * 10Sep96 anc *.
PHILIPSANUBIS
It only comes out of stand by by local command, not remoteIntegrated 7600. * out 95 anc *.
PHILIPSANUBIS
So fica em stand by (power off).Verificar cristal 1630 de 12mhz. * jul 95 anc *. eprom 7710. * out 95 anc *. receptor (1602). * 20dez95 mjs *.
PHILIPSANUBIS
Tuner with little gainLeaky capacitor 2265. * 04Jul96 jpba *.