Search: PHILIPS
Results: 14168

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPSAK630
Damaging laser unitSolder short between pins 24 and 25 of the tda8809 (7830). * sea 95 aac *.
PHILIPSAK630
Turns off display after starting reading7702
PHILIPSAK603
Noisy or crunching sound7870.** coil 5860. * mai 95 ctr *. cdm unit. * 09Oct96 aac *
PHILIPSAK603
So fica em stand by (power off).7840 uns8050 verificar data pino22 set 94 eag.
PHILIPSAK603
No focus.Check integrated: 7810, 7832 / capacitors: 2817, 2818 and also check the unit coil (open). *may 95 acm*
PHILIPSAK603
Jumping track2834/2833/ 3819/3820/ 7830/
PHILIPSAK603
Doesn't spin discCdm. integrated 7810. * mai 95 ctr *.
PHILIPSAK603
Does not read after heating.Check cdm unit. * 29Aug96 lt *.
PHILIPSAK603
Doesn't read5001. cdm 7810/7830. * conf. mai 95 ctr *. with bad hf signal, broken track of 6843. * mai 95 ctr *.
PHILIPSAK603
Stand by led does not turn off. (device on)7840.**
PHILIPSAK603
Laser without emission.7801 from +5v; resistor 3820 open; capacitor 2801 shorted. * mai 95 acm *.
PHILIPSAK603
Display with all segments litCoil 5850.** integrated front panel 7700. * mai 95 ctr *.
PHILIPSAK601
Noisy or crunching sound7852. cdm. * conf. mai 95 ctr *.
PHILIPSAK601
Squeaky soundVerifier 4264. *May 95 level*. Integrado 7850, 7851 and 7852. *May 95*.
PHILIPSAK601
Jumping track2834/2833. * set 94 eag *. cdm. ** 3819. ** integrado 7830. * mai 95 acm *.
PHILIPSAK601
Doesn't read the first tracks7831 lm272, 2833, 2834 always replace the two set capacitors 94 eag.
PHILIPSAK601
Does not read some tracks.Integrated 7831. * mai 95 ctr *.
PHILIPSAK601
It doesn't work (it stays off).Switch 7600/
PHILIPSAK601
Doesn't readStep. * Garden * 7010/7810/7830. * Garden *. Resistor 3820. *Jun 95 level*. Mau Konakto de Solda M.51564. * 09:96 am *.
PHILIPSAK601
Does not accept remote commandsIntegrated 7841. * mai 95 ctr *.