PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14168
Results: 14168
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | CN-4037 | Retraces on screen | C400 (100 µf 25 v) | ||
PHILIPS | VR-457/78 | Dead open f901 | Cp1101 (fuse link icpn15), d955, q901 (2sk2129) | ||
PHILIPS | VR-453 | Reproduction without color | Cold solder on pin 26 of ic601 | ||
PHILIPS | 3106-106-TX | No vertical deflection | C509 (4,7 nf) | ||
PHILIPS | 12 TX 1572 | Unstable vertical deflection | C527 (100 µf 35 v) | ||
PHILIPS | R22 K210 | Dead | Vl603 fuse holder | ||
PHILIPS | NCF | Does not tune channel | C089 (10 nf) | ||
PHILIPS | GL1045 | Dead | D345 (zener) | ||
PHILIPS | GL1011 | Vertical treme | C410 | ||
PHILIPS | CT6000 | Flashing luminance | C221 (68 µf 25 v) | ||
PHILIPS | CT3320 | No vertical sync | D388 (baw62), ts392 (bs548b) e ts397 (bs558) | ||
PHILIPS | CN-4065 | Loses color | Bad 00 (don't miss it) | ||
PHILIPS | CN-4065 | Retraces at the top of the screen | C400 (100 µf 25 v) | ||
PHILIPS | CN-4037 | Retraces on screen | C400 (100 µf 25 v) | ||
PHILIPS | CTO | No synchronization or warping of the image at the top of the screen | Replace all the electrolytic capacitors in the ci 2577 sector - if that doesn't help, replace the entire ci 2577 - or the capacitor in the 12v supply that powers the tda2577 | ||
PHILIPS | 29PT 558/78 | Works for a few minutes and disarms | Ver c214-213 pino 38ci | ||
PHILIPS | 20PT222A | TV doesn't turn on, when measuring the power supply the voltage fluctuates from 95 to 107 and back to 56 and rises again | R3538-100k changed | ||
PHILIPS | 16GL1033 | Acts protection | R3342-8k2 r3346-18k r3319-100k alterados | Replace r3342 of 8k2 r3346 of 18k and r3319 of 100k | |
PHILIPS | 20GL1040 | Bad image, tuning varies, and when changing channels, the horizontal drops | C195 470x16 | ||
PHILIPS | 14PT3131/4131/3331/4331 | High or low | Low voltage change r3526 (at 110v it doesn't work and at 220 it works with voltage below 65v on +b) |