Search: PHILIPS
Results: 14168

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPS14PT3131/4131/3331/4331
Does not work (it remains switched off).- check changed mosfet 7521 - see item 5.7 repair tips in the service manual pg. 21
PHILIPS14PT3131/4131/3331/4331
Does not work (it remains switched off).- check possible changes in the 1k 3525 smd resistor connected to pin 9 of the ci 7250.
PHILIPS14PT3131/4131/3331/4331
Does not work (it remains switched off).- check 6505 (zener 22v), 7520 (ci tea1506t) and capacitor 2521.
PHILIPS14PT3131/4131/3331/4331
Does not adjust the volume (it may or may not indicate on the display).- open menu and deactivate volume limit, if not active volume limit check if it is not in hotel mode..
PHILIPS14PT3131/4131/3331/4331
Does not open vertically- check smd 7461 transistor.
PHILIPS14PT3131/4131/3331/4331
RGB return lines on top when powering on.- check capacitor 2460 (see service information ts04-016).
PHILIPS14PT3131/4131/3331/4331
Return lines when calling.- verificar capacitor 2460 (68nf 100v).
PHILIPS14PT3131/4131/3331/4331
Modification2) solder a wire from the diode cathode to the 3618 resistor.
PHILIPS14PT3131/4131/3331/4331
Modification2) raise resistor 3618 (+3.3v side),
PHILIPS14PT3131/4131/3331/4331
Modification1) remove the 5601 coil (5.6µh) and replace it with a bat85 diode (code 4806 130 37364) (cathode for pin 54),
PHILIPS14PT3131/4131/3331/4331
Turns on randomly - exits the stby function without command.- this symptom may occur at low temperatures in some ci 7200 versions.
PHILIPS14PT3131/4131/3331/4331
Interference with sound or image on other devices when stb.- remove 1nf capacitor position 2585. if the product's power supply is 220v, the fet 7521 must be checked for 14" models fet transistor fqpf6n80 (9322 187 17687) and for 20 and 21" models fet transistor fqpf7n80 (9322 174 27687 ).
PHILIPS14PT3131/4131/3331/4331
Interference in the image - check diode 6463, possibility of alteration.- check for possible lack of solder on the 3456 resistor.
PHILIPS14PT3131/4131/3331/4331
Interference in the image - check diode 6463, possibility of alteration.- possibility of changing the power supply resistor 3547 (330k).
PHILIPS14PT3131/4131/3331/4331
Image without definition, like weak trc.- check the possibility of changing one of these resistors 3443, 3444 or 3318.
PHILIPS14PT3131/4131/3331/4331
Excess brightness at the av entrance.- check resistor 3181 (75r) altered or unsoldered.
PHILIPS14PT3131/4131/3331/4331
Folding image vertically- check capacitor 2460 (see service information ts04-016).
PHILIPS14PT3131/4131/3331/4331
Folding image vertically- device presents vertical folding in the image after some time of heating, symptom appears when the expand function is activated. see figure. a 1r resistor (code 4806 113 97046) must be added in parallel with position 3446.
PHILIPS14PT3131/4131/3331/4331
Folding image vertically- check capacitor 2460 (see service information ts04-016).
PHILIPS14PT3131/4131/3331/4331
Folding image vertically- check diode 6463, possibility of it being altered.