Search: Panasonic
Results: 2880

Panasonic Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PANASONICTX14GV1
No pic - int comes on with bang - sound okInvisible crack in print at loptr coll
PANASONICTX14GV1
Dead with mains relay clicking continuously.Replace 47uf 25v (c840) in standby supply circuit.
PANASONICTX14B4T
No signals found when tuningEarom replacement ic702 24c14 & mod kit fitted
PANASONICTX14B3T Z375 CHASSIS
Field collapse noticed when a1s advancedIc301 tda8456 - also do following mod - change c309 to 22µ 100v, add 0µ01 across r310 & fit 2r2 1w in place of jumper r420
PANASONICTX143T Z375 CHASSIS
Tripping - st/by led flashingLoptx
PANASONICTC862G
Line hold drift.C505 ( 1u f )
PANASONICTC800G
Frame collapse.C407 ( 3.3uf , 16v ) tantalum.
PANASONICTC486
Line hold drift.C505 ( 1u f )
PANASONICTC481
Int loss signalsR545 dry
PANASONICTC381G
Raster - bright - set tripping.Grid-cathode short in 320btb22 tube.
PANASONICTC381G
Dead - gives one trip at sw onHt ok; loptx u/s
PANASONICTC381G
Black area at bottom right-hand side.C857 ( 0.47u f ) bipolar.
PANASONICTC361
Tripping from cold.D552 in parallel with scan thyristor.
PANASONICTC29V50R MX2
DeadR833 (22e) emitter resistor to q802 in power supply
PANASONICTC297NP
Flyback lines - lack of definition.C356 ( 1u f ) on crt base.
PANASONICTC225
Field collapseDry joints q403
PANASONICTC2201 PIU-S1C
Tripping pulsating sound , eht & frame collapseReplace c816 ( 220uf ) , c813 ( 1uf ) , c1029 ( 10uf ) d809 , d819
PANASONICTC2201 PIU-S1C
Frame int collapse.Drys on transistors 454/455.
PANASONICTC2195 Z3
Dead but whinesR556 1a cct prot o/c, t531 line dr trfmr dry joints, loptr 2sd1439 leaky note loptx may test faulty on lopt tester but may not be - as i found out
PANASONICTC2175
No colour.470u f 16v by decoder ic.