Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4741
Results: 4741
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | PC 2039 CPH 4 | Works for a period and turns off | After leaving it on for a few minutes and working perfectly, it turned off. | Abl line resistor (r-723) 27k toast, just replace and that's it. | Ademar Videira sc |
| PHILCO HITACHI | PC2041 | Closing a little vertical at the top and shaking at the bottom | After changing almost all the electrolics and it didn't solve the problem, I did the capacheck on the c908 | Replace c 908 10 micro for 50v | marciorvgo |
| PHILCO | PH21 SS | Vertical closing intermittent, about 10cm at the bottom and top | Was checked and replaced cond. electricity, diodes and vertical circuit and nothing... finally a resistor r459a - 0.82r (gray, red, silver, gold and purple). | Just replace it with another one and that's it... ok | Max Andrade |
| PHILCO | 1452(O)AV | Nothing working, there was only 160v on the capacitor. | I replaced the 220k open power supply resistor and it worked. | joosias | |
| PHILCO | PH21SS | When connecting to the mains, the LED lights up and goes into protection | 150k open resistor r554 and 100k r552 | Just replace and go for the hug | Fabio Dullius |
| PHILCO | PCS2976S | LED just blinks TV doesn't turn on | Diode d918 primary power supply short | Darci Fuhr | |
| PHILCO | PH21US | When it heats up, the sound crackles | N703 zener 33 v | Replace | ELETRONICA MAURI JUNIOR |
| PHILCO | TVPH21SS | Very dark image, even with the brightness fully turned on | Change the electrolytic capacitor c 569 of 22 uf by 250v of the +b of 180 v, for a 4.7uf by 250. | Ita | |
| PHILCO | PH 21 USA1 | Turning off by itself and noise in the sound | V502 and n 703 with leak | V502 transistor 2sc 2383 = diodo n 703 zener 33v | ELETRONICA MAURI JUNIOR |
| PHILCO | TPF294F | With protection activated and little noise in the transformer. | Cold solder on pci deflection h | Just resolder with a good soldering iron and blue solder. good luck!!! | Jhone eletronica |
| PHILCO HITACHI | PC-1613 | He called whenever he wanted. If it turned on there would be a buzzing sound at the power supply. | C911, with small leak | Replace c911 and check all the power supply capacitors. | LM |
| PHILCO | PH14-PH21-PH29 | Menu stuck | When asked for the password, type 4711 | Go to "child lock" and deactivate | paulorusso |
| PHILCO | PH14E | Doesn't start at all | Tea1533p defective, I put a tea1507p and it worked perfectly | paulorusso | |
| PHILCO | TV PH29 VERSãO A | Turns on and starts making noise on the flyback and turns off | Capacitor 680pf 2kv c450 ao lado do flyback | eletroademar | |
| PHILCO | PH21US | Doesn't start | 1000x25v capacitors at the power supply output | Replace all 1000x25v | ELETRONICA MAURI JUNIOR |
| PHILCO | PH14B | No picture, normal sound | Press the at key on the original remote control | If the image appears, disable the at enable function in services mode | paulorusso |
| PHILCO | PH21B | No picture, normal sound | Press the at key on the original remote control | If the image appears, disable the at enable function in services mode | paulorusso |
| PHILCO | PH29B | No picture, normal sound | Press the at key on the original remote control | If the image appears, disable the at enable function in services mode | paulorusso |
| PHILCO | PH29B | Normal image, no sound... | C833 e c829 de 1000uf 25 v | In my case, the c833 was stμFfed, I replaced it and the sound came back normal. | vilenon |
| PHILCO | PH29B | Power supply does not arm, in this case there is only primary power supply and not secondary | Q806 ,bc1815 with small leak. | Replace it without testing and the power supply will arm... | vilenon de oliveira |