Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | CPH 05 | Absence of colors | Capacitor c 212 (100 nf) in short | ||
PHILCO | CPH 04 | Noise similar to a leaking mat | Broken tsh fixing clip | ||
PHILCO | CPH 04 | Inoperative, the power supply does not arm | Capacitor c 716 (6 n 8 x 1600 v) shorted | ||
PHILCO | CPH 04 | Horizontal frequency varying, image with colors tending to green and violet | Crystal x503 (3.58 mhz) broken | ||
PHILCO | CPH 04 | Turns off after running for a few minutes | Resistor r 713 ( 4.7 k si) open | ||
PHILCO | CPH 03 | Lack of horizontal synchronism | Capacitorc 613 (18 pf) with leak | ||
PHILCO | CPH 03 | When turned on, the power power supply burns out (str series) | Diode d 909 or capacitors-c 910 or c 925 shorted (both 4.7ufx160v) | ||
PHILCO | CPH 02 | Vertical with insufficient height, rounded dark band at the top | Resistor r612 (12k x 500 v) with changed resistance or open | ||
PHILCO | CPH 02 | Intermittently reduced vertical scan | Resistor r 616 ( 3,3 k q.) aberta | ||
PHILCO | CPH 02 | Dark screen, normal audio | Resistor r 761 f 39 k ) open | ||
PHILCO | CPH 02 | Distorted sound | Resistor r418 (100 ) 0.75 w aberto | ||
PHILCO | CPH 02 | Without mat, voltage on the base of q 704 at 17...18 v, filament voltage of the trc at 2v. broken tsh symptom | Capacitor c 709 (4 n 7 x 50 v) shorted | ||
PHILCO | CPH 02 | No chroma, normal audio | Capacitor c 515 (47 k - disc) leaking or shorted | ||
PHILCO | CPH 02 | No chroma | PAL delay line (dl 501) with broken internal contacts | ||
PHILCO | CPH 02 | No audio, no video | Capacitor c 911 (10 u fx160- v) with loss of capacitance or high esr | ||
PHILCO | CPH 02 | Off-frequency vertical sweep oscillator: "rolling" image | Capacitor c 604 (1 u f x 25v) with loss of capacitance or high esr | ||
PHILCO | CPH 02 | Does not memorize channels | Capacitor c715(4u7x160v) with loss of capacitance or high esr | ||
PHILCO | CPH 02 | Raised mat, high-voltage exhaust on trc socket | Resistor r911 (10k open | ||
PHILCO | CPH 02 | Dark horizontal line dividing the dotrc screen | Capacitor c 614 (4.7u f x 50 v) with loss of capacitance or high esr | ||
PHILCO | CPH 02 | Dead, no plot, no audio | Diode d 906 (ske 4f2/06) with leakage and/or resistor r 909 (82 k q) open |