Search: Philco
Results: 4741

Philco Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILCOPHT 550
No sound at outputs null mute voltageCapacitor e27 220x16 shortReplace the capacitor that is part of the mute connected to the dz 6 and q4itan
PHILCOTP1452
Power supply does not oscillate! power supply flashing with 60v just threatens to armChopper traffic like loose ferrite!I replaced the traffic and it works normallyorlando lott
PHILCOTP 1454
TV image disappears, the screen becomes dark with characters and normal audio. Sometimes the image would return, it would be normal as if tsound was no defect, then it would disappear and the screen would become dark again with characters and sound.The 10nf smd 616 capacitor connected to pin 49 of the main IC was the cause of the problem. Note: the following components connected to this line from pin 6 of the vertical ci can cause this problem: c 604, r 604, r605 and d 602.In this specific case, capacitor 616 that was shorted was replaced.jfr
PHILCOPH21M
DeadVer. os diodos d813 fr-104, d333 zener-18vJNETO GOIANINHA
PHILCOTPF 2902
Power supply keeps pulsing and doesn't activateW. 910 680pf open or shortedReplace for another of the same valueE.MATOS
PHILCOPH21M SS
It turns on and then turns off with the reduced weave at the top, wsound a bright horizontal line appears.Turns on with the weave reduced by about 3cm at the top, wsound a bright horizontal line appears and turns off immediately afterwards. on the vertical the voltage of -14v was not found. reason: d811 (fr104) open. It was replaced by a VF4007.littlecarlos
PHILCOPH-21
MSS
This TV had already been sent to other technicians and arrived repaired. When I turned on the LED, the control or key turned on and the LED turned off and it kept blinking.C-823 of 1000x25 it was dryIt was just a matter of changing and leaving for a hug.eletronica cavalcante em martinopole
PHILCOTPF2140
TV does not turn on with the LED on and tsound is a noise (whistle) at the power supplyTwo defective d:908/909 diodes.Replace the diodes and check the power supply voltages first.adriano SB
PHILCOTP2054
Didn't turn on the stbThe cracked plate next to the power buttonSome jamps were made and the trails were very fine, beautifulrenatosilva
PHILCOPH29
No image and the tube doesn't light upOf a few light taps on the tube cannonReplace the tube or tap the tube nozzle lightlyrobson tenic
PHILCOPH21C
Turning off alone and vertical rangeR 839 changed from 82k to 100kReplace r839 82k 3wELETRONICA MAURI JUNIOR
PHILCOTV PH21SS
Power supply +b reset led offC.806 shortedThis one hit a lotjulio de itaguai
PHILCOTV PH21SS
+b power supply with 20 voltsBad memoryReplace directlyjulio itaguai
PHILCOPH-21C
Stained screen, with various colors.It was applied with a demagnetizing cap but it didn't solve the problem, the stains continued, the ptc was removed and measured and it was good,Don't test the ptc, replace it and go for it with the problem solved.Ademar / Videira s.c
PHILCOPH29US
Lines at the topC 406Replace directlytec center
PHILCO HITACHIPC-1443
DeadR902(82k) openReplace the sameJarbas (ELETRO-SERV)
PHILCOPCS-2700
It doesn't work, and it smells like it's burning.470pf capacitor shortedReplace the same c-708 connected to the horizontal output collector and the chassis.Ademar / Videira s.c
PHILCOTPF2121C
TV turns on LED presses power does not turn back to LEDCapacitor c715 lowReplace the same one for a new one!adriano SB
PHILCOTP2920
Does not turn on, LED flashes and the protection is activated!D1701 short!Replace the sameorlando lott
PHILCOPH21E
The power supply doesn't turn on at all. This TV had already come from several workshops, they said it could only be solved at an authorized amis, when I picked it up, it didn't turn on, nor did the LED, they had already changed the ci of the tea1533 power supply, then I realized that the 3 transistors on the power supply weren't moving.I replaced the 3 c1815 npn transistors and it worked, I ran to hug, sound's a tip fileDAVI DE PEIXE-BOI