Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | PH21US | When it heats up, the sound crackles | N703 zener 33 v | Replace | ELETRONICA MAURI JUNIOR |
| PHILCO | TVPH21SS | Very dark image, even with the brightness fully turned on | Change the electrolytic capacitor c 569 of 22 uf by 250v of the +b of 180 v, for a 4.7uf by 250. | Ita | |
| PHILCO | PH 21 USA1 | Turning off by itself and noise in the sound | V502 and n 703 with leak | V502 transistor 2sc 2383 = diodo n 703 zener 33v | ELETRONICA MAURI JUNIOR |
| PHILCO | TPF294F | With protection activated and little noise in the transformer. | Cold solder on pci deflection h | Just resolder with a good soldering iron and blue solder. good luck!!! | Jhone eletronica |
| PHILCO HITACHI | PC-1613 | He called whenever he wanted. If it turned on tsound would be a buzzing sound at the power supply. | C911, with small leak | Replace c911 and check all the power supply capacitors. | LM |
| PHILCO | PH14-PH21-PH29 | Menu stuck | When asked for the password, type 4711 | Go to "child lock" and deactivate | paulorusso |
| PHILCO | PH14E | Doesn't start at all | Tea1533p defective, I put a tea1507p and it worked perfectly | paulorusso | |
| PHILCO | TV PH29 VERSãO A | Turns on and starts making noise on the flyback and turns off | Capacitor 680pf 2kv c450 ao lado do flyback | eletroademar | |
| PHILCO | PH21US | Doesn't start | 1000x25v capacitors at the power supply output | Replace all 1000x25v | ELETRONICA MAURI JUNIOR |
| PHILCO | PH14B | No picture, normal sound | Press the at key on the original remote control | If the image appears, disable the at enable function in services mode | paulorusso |
| PHILCO | PH21B | No picture, normal sound | Press the at key on the original remote control | If the image appears, disable the at enable function in services mode | paulorusso |
| PHILCO | PH29B | No picture, normal sound | Press the at key on the original remote control | If the image appears, disable the at enable function in services mode | paulorusso |
| PHILCO | PH29B | Normal image, no sound... | C833 e c829 de 1000uf 25 v | In my case, the c833 was stμFfed, I replaced it and the sound came back normal. | vilenon |
| PHILCO | PH29B | Power supply does not arm, in this case tsound is only primary power supply and not secondary | Q806 ,bc1815 with small leak. | Replace it without testing and the power supply will arm... | vilenon de oliveira |
| PHILCO | TV PH 21A | Normal image but no sound | V173 changed | sandro | |
| PHILCO | TP2054 | Inoperative /led blinks weakly with little brightness | Zd906 altered! | orlando lott | |
| PHILCO | TPF29S4F | When you press the power key, the power supply goes off for a few seconds, then disarms and activates the protection | Check capacitor c1703 | Replace the same | Mario Teilor o da penha |
| PHILCO | TPF29S4F | Hitting relay | Open resistor r919 | Replace the same value 120k 0.4w metal | Mario Teilor o da penha |
| PHILCO | PCS 2976 | Cap. 715 (2k2 / 1600v) aberto | This email address is being protected from spambots. You need JavaScript enabled to view it. | ||
| PHILCO | PH21C | Power supply pulsating flashing led | Ic803 (tl431)com flake | Replace the same | jean alves |