SAMSUNG TV Repair: Common Faults and Solutions.
Search: SAMSUNG
Results: 3754
Results: 3754
SAMSUNG Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
SAMSUNG | UN40F5500AG | The LED kept flashing but it doesn't turn on. She stopped on a day with lots of lightning. | Icm851 ( 43a ) shorted. | ||
SAMSUNG | UN40F5500A | The LED flashes 5 times in batches of 2 flashes and repeats | Power supply board | ||
SAMSUNG | UN40F5500A | LED flashes 5 batches of 2 times | Open led | ||
SAMSUNG | UN40F5500 | Turning off after five minutes. had normal sound and image and performed all the functions | Main_unit | ||
SAMSUNG | UN40D5500RG | Restarts itself constantly | Main board. corrupt firmware. | ||
SAMSUNG | UN40D5500RG | When turned on, it turns off the screen and then turns on by itself and stays on and off | Main board | ||
SAMSUNG | UN40D5500 | The Samsung Smart logo appears and turns off. | Main board. the 5500 board = the 5000 board. | ||
SAMSUNG | UN40D5500 | When turning on, a glow would appear on the screen and it would go off shortly afterwards. everything ok with the power supply. | Open fuse on t_com board | ||
SAMSUNG | UN40D5000PGXZD | Clicking noises during operation! | Insulating tape was placed between the rear cabinet and the LED panel. | ||
SAMSUNG | UN40C5000QM | Does not come out of stand by | Dp803 shorted | ||
SAMSUNG | UN32F5200AG | It doesn't turn on and stays on standby blinking. the pfc is low (280v). | LED panel connector with sunken pin. I didn't give enough contact. | ||
SAMSUNG | UN32F4200 | Dark screen | Fet d3n4 and open leds | ||
SAMSUNG | UN32EH5000G | Doesn't start | Hand plate | ||
SAMSUNG | UN32D5500RG | Turns off every 2 minutes and 7 seconds. When this time is up, it turns off and on immediately and repeats. | Main board, placed on the d5000. It's more affordable, it's just not smart. | ||
SAMSUNG | UN32D5500 | How to release the power supply and inverter | You don't need to do anything to release the power supply and the inverter | ||
SAMSUNG | UN32D4000NG | Does not turn off | Oxidation in the solder on the power supply board, preventing the motherboard from entering stand-by level | ||
SAMSUNG | UN32D4000NG | Does not turn off | Cleaning and resolving some components on the power supply board | ||
SAMSUNG | UN32D4000GXZD | Doesn't start. LED flashes 5 times. | Qq9101. used a mmbta92 which is a 300v 100ma smd pnp | ||
SAMSUNG | LT24A550 | Sem of a video component | Female connector on the signal board when removing the plug, it bends inside the connector. Just untwist it. | ||
SAMSUNG | LN32B550K1V | Turn on and off | Rp803, 804, 809, 810 and 811 open |