SEMP TV Repair: Common Faults and Solutions.
Search: SEMP
Results: 2828
Results: 2828
SEMP Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| SEMP | C29LH43B | Vertical closed | D476 | Component poorly soldered at the factory, cold soldering over time, also check r476, pin 3 of the flyback | This email address is being protected from spambots. You need JavaScript enabled to view it. |
| SEMP | FS TUNING CI TB1231AN | Vertical closed, squeaking sound. look at the whole area of the vert. ok. look at dz830, dz421. | They are between the ci and the s.vertical. | ELET.JN NEVES Ce | |
| SEMP TOSHIBA | 1495 RM U15 | Faulty primary power supply | Doesn't start | Open fuse-r3r3 open7w-str w5753 replaced-dz876 5v6 with leak and r smd 876 220 replaced | Manoel Fernando |
| SEMP | TVC-10IL | No color | Potentiometer r520 | After checking the chroma burst, I got the r520 open and just replaced it and the colors came back | Bruno Capozzoli |
| SEMP | TV2134 | Dark screen (no weave) | C409(394j/250volt)poliester | Replace it without testing | Jarbas Santos (Eletro-serv) |
| SEMP | TV2134 | Half moon side edges | Q303(flake) | Replace it without testing | Jarbas Santos (Eletro-serv) |
| SEMP | TVV2134 | Half moon side edges | Q303(flake) | Replace it without testing | Jarbas Santos (Eletro-serv) |
| SEMP | TV2134 | Side edges | Q409 (with leak) | Replace it without testing | Jarbas (ELETRO-SERV) |
| SEMP TOSHIBA | TV2934-BSL SK91 | Making a noise and the image ripples | C607 220mf /450v open this capacitor is in the power supply | Replace and a hug. | toinho eletron |
| SEMP | TV2090 U14 | White screen with 2cm bands on the sides and does not oscillate normally, it seems like the mat is low. | D840 5v6 shorted | Replace the saying whose | ÁdrianChapadãodoCéu |
| SEMP | 1488 U13 | TV turns on normally + has a flat screen. does not display video lines. with sound. | The memory (smd) 24c04 was replaced. Since I didn't have one, I adapted a great memory and it worked. | ROBERTO PINTO | |
| SEMP | TV 2121NF | When turning on stand by it turns on and off, nothing reaches the capacity. 220mf by 160vpower supply | Swap str 5453c, look at 5v6 zener near him. | JN ELET. NEVES CE | |
| SEMP | TV 1484 | 115vdc arrives at the power supply and collector of the s.horiz. but it only turns on the standby, it doesn't generate | Replace c889 470mf for 35v power supply | JN ELET. NEVES CE | |
| SEMP | 2922JFS | TV turns on sometimes it doesn't. stand by turns on and off | Change cover.10 for 50v in front of the power supply regulator | JN ELET. NEVES CE | |
| SEMP | TV2923 LEM 10/FS8 | Vertical, shrunken at the top and bottom in the middle, has images with a lack of width | Measure the deflector coil if the test does not give 12 homs or more, remove the vertical coil as the glue has corroded one wire of the coil, ok. | ignacio gomes neto rio verde ms | |
| SEMP | TV 2134B SL-SK-11 | When turning on the TV, it lights up stand-by and activates protection | C634 -47ufx160v | Replace | EMERSON RIBEIRO |
| SEMP | 2082 U8 | Works normally but turns off after a few minutes. | Ver o zenner d818 13v | Master Eletronica | |
| SEMP | TV 1460E | Vertical closed | Check r 325 24k | After further checks, I replaced it and the problem was resolved | DANGRA ELETRÔNICA SÃO PAULO |
| SEMP | TV1470E | Does not pick up channels, goes out of frequency, if you heat the coils in the middle of the board with a hairdryer, the image enters | Coil l 151 | Replace coil l 151 | celito santo angelo |
| SEMP | LUMINA | Noisy sound normal image | We are not stragglers | Cold welding no video ci | denilsonba |