TV Repair: Common Faults and Solutions.
Search:
Results: 87441
Results: 87441
Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| SONY | XR6180 | No audio | All functions ok. unit had no audio output. | ||
| SONY | STRGX80ES | Hinges for lid assembly | A dealer in salt lake city reported the hinges were broken in three units. need the part number for hinge that connects no. 1 and no. 8 on page 44 of the service manual. | ||
| SONY | XR6087 | Tape sticks when ejecting | Tapes are intermittently sticking inside when ejected. thereturn link has a square bend on the end toward the rear of the deck andan angular bend on the front. if the spring is installed backwards, itcauses the problem. -hq comments: thanks for the inf | ||
| SONY | XR6180 | Tape sticks when ejecting | Tapes are intermittently sticking inside when ejected. thereturn link has a square bend on the end toward the rear of the deck andan angular bend on the front. if the spring is installed backwards, itcauses the problem. -hq comments: thanks for the inf | ||
| SONY | XR7070 | Tape sticks when ejecting | Tapes are intermittently sticking inside when ejected. thereturn link has a square bend on the end toward the rear of the deckand an agular bend on the front. if the spring is installed backwards, itcauses the problem. -hq comments: thanks for the info. | ||
| SONY | XR5000 | Tape sticks when ejecting | Tapes are intermittently sticking inside when ejected. thereturn link has a square bend on the end toward the rear of the deck andan angular bend on the front. if the spring is installed backwards, itcauses the problem. -hq comments: thanks for the inf | ||
| SONY | XR5500 | Tape sticks when ejecting | Tapes are intermittently sticking inside when ejected. thereturn link has a square bend on the end toward the rear of the deck andan angular bend on the front. if the spring is installed backwards, itcauses the problem. also pertains to serial number 50 | ||
| SONY | XR4157 | Tape sticks when ejecting | Tapes are intermittently sticking inside when ejected. thereturn link has a square bend on the end toward the rear of the deck andan angular bend on the front. if the spring is installed backwards, itcauses the problem. -hq comments: thanks for the inf | ||
| SONY | XR4147 | Tape sticks when ejecting | |||
| SONY | SLV575 | Defective cassette basket (release arm) | The release arm located on the right side of the loadingcassette mechanism comes off track. | ||
| SONY | CDP209ES | Ef balance adjustment | Service manual shows ef balance and adjustment procedure, butdoes not give adjustment pot etc. laser pu is preadjusted at factory andis not field adjustable. service manual is in error. | ||
| SONY | CDPC800 | Part number not listed for chassis | There is no part number listed for the chassis assembly, shownon page 27 of the s/m. it is listed as not supplied. do i have toreplace this unit to resolve this problem? -hq comments: let me see if i can get a part number for this.to tokyo: can you su | ||
| SONY | KV27TS22 | Picture gets darker on left side, replace v out ic-501 | Picture is dark on left side of screen and progressivelydarker toward the edge. it becomes more pronounced as unit warms up andapproaches approximately two inches from left to right. the symptom canbest be seen using the color bar pattern in which case | ||
| SONY | CCDF33 | No camera video after 15 seconds | No camera video after 15 seconds. the iris would close after15 seconds and would not re-open. | ||
| SONY | CCDV4 | No camera video after warm-up | After five minutes camera video would go out, audio was fine. | ||
| SONY | KV4000 | No band select, faulty band select sw s901 | No band select. the unit stays in the low band mode eventhough a flicker can be seen on the screen and a click in the audiowhen the band select button is depressed, band switching does not occur. | ||
| SONY | EDV9500 | Incorrect alignment procedures/edv-9500 service information | The afc adjustment in the alignment instructions is incorrect. rv-001 controls the delay of the hdw signal, not the whd. since the vcoreset pulse generator is synchronized to the hdw in variable speed,playback if this adjustment is not set correctly fla | ||
| SONY | XS6940 | Part number for speakers (car stereo) | Need part number for speaker assembly for xs-417 and xs-6940.computer says exchange but also says finished goods not avail fromnpc. what do we do with these if they are in-warranty orout-of-warranty? it would help if we could get a list of part numbers | ||
| SONY | XS417 | Part number for speakers (car stereo) | Need part number for speaker assembly for xs-417 and xs-6940.computer says exchange but also says finished goods not avail. fromnpc. what do we do with these if they are in-warranty orout-of-warranty? it would help if we could get a list of part number | ||
| SONY | CCDV8AFU | No power up of camera section | Camera section would not power up. found dc-dc converter bad.replaced dc-dc converter camera would power up for just a second then shutdown. measured 5 volt line withΩ meter (5 line measured 4Ω toground). traced it down to shorted c-741 on me-1 |