MITSUBISHI TV Repair: Common Faults and Solutions.
Search: MITSUBISHI
Results: 1346
Results: 1346
MITSUBISHI Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| MITSUBISHI | TC2099 | With image without horiz synchronization. | Cap elet, c705 1/50v | haecio | |
| MITSUBISHI | TC 2098 | Poor width | Capacitors 555 and 556 of 5n6 and 4n7 | Replace - check the power supply | Moré |
| MITSUBISHI | TC2010 | High power supply | He softened | Carlos | |
| MITSUBISHI | TC2098 | No sound and image collector transistor below 60v | Change power supply regulator | eletronica house tuta | |
| MITSUBISHI | 2099 | Sparking in the socket | Fly back | eletronica house | |
| MITSUBISHI | TC-2040 | Absence of color | C-613 | Lauri | |
| MITSUBISHI | CS26EX1 | Turns on normally, sound and image, after a few seconds tsound is a black picture, with only the image remaining 1 centimeter on the sides | Poor eeprom | ||
| MITSUBISHI | TC-2018 | Std-by led on, does not start | Solda fria no fly back | ||
| MITSUBISHI | TC-1418 | Keyboard does not work, turns on does not change channels, does not increase or decrease the sound | R725 changed | Andrade Sequeira | |
| MITSUBISHI | TC-1499 | Does not start | C905, c906, c907 next to str6707 | ||
| MITSUBISHI | TC 1418 | White screen with characters | Enter service mode and turn off blank mode | KELSON | |
| MITSUBISHI | TC 2010 | Dead | Blown fuse, rectifier, q901 and ic 901 faulty | Shorted rectifier, faulty q901 and ic901 | miguelito |
| MITSUBISHI | TC 1418 | Just on standby, doesn't turn on. | Ic 251 faulty 9v voltage regulator, output voltage below normal, triggering protection pin 30 of ic701 (micro) x-ray | Replace ic 251 9v regulator | MAGAIVER |
| MITSUBISHI | 1492 | Image was shifted to the left | R511 | ||
| MITSUBISHI | TC-2099 %%% | The stand-bye LED flashes, that is, the power supply voltage varies | Capacitor 22uf/100v - c907 | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| MITSUBISHI | CT-14MS1EM | On, it only works with channel 0 (zero) and it only gives me ants! If you try to change channels the screen goes black for a moment and returns to channel 0. | In 99% of cases it's the memory you can use a blank memory but the TV will keep the channels skipped then you need to open the channels otherwise you won't leave channel one if it is I'll explain how to do it later (brites). you can use 24c08 and the TV will have 60 channels instead of the current 40. the memory must be empty. | See forum - faults resolved more information about this fault fault ct-14ms1em < /a> | TIRAS - BRITES |
| MITSUBISHI | TC-2099 | Does not turn on, LED blinks | Ss07 | ||
| MITSUBISHI | TC-2099 | LED flashes; doesn't work | Change the three electrolytic capacitors of the 22/100 power supply; 470/16; 220/63 | ||
| MITSUBISHI | TC-1441 | Burns horizontal output | C501 | ||
| MITSUBISHI | TC-2098 | Takes time to exit stand-by | Transistor q703 |