MITSUBISHI TV Repair: Common Faults and Solutions.
Search: MITSUBISHI
Results: 1346
Results: 1346
MITSUBISHI Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| MITSUBISHI | TC-2099 | Doesn't start | Change d 952 was shorted | Replaced resolved | Eronaldo |
| MITSUBISHI | TC-1631 | High power supply, shorting out the zener d909(120v) | Capacitor c917(10mf x 160v) descapacitado. | Persio(TVCompany) | |
| MITSUBISHI | TC 1492 | Fountain knurling with buzzing. | Capacitor c 909=4.7 for 160v, no capacity. | The same was replaced and only joy. | Armando da Eletrônica só Tv. |
| MITSUBISHI | TC1498 1498 | Tracks passing diagonally across the screen | I changed all the capacitors on a computer, and the device started to work normally | adelmo | |
| MITSUBISHI | TC 2098 | Turns on, after turning off, it doesn't turn on again | Check ci 901 feedback components | In my case, the cap. 905 of 220 by 16v was exhausted | JUNIOR SYSTEM ELETRONICA |
| MITSUBISHI | 2098 | Gray screen with no characters | Rusty pipe socket | Replace the same | This email address is being protected from spambots. You need JavaScript enabled to view it. |
| MITSUBISHI | TC-2009 | Connects with very high power supply giving the fly | Changing photocoupler may be shorted | Replaced resolved | Eronaldo |
| MITSUBISHI | TC-2009 | League clicking | Wide capacitors 6n8 or 4n7 | Vericar c de 6n8 | Eronaldo |
| MITSUBISHI | 2099 | When pressing the power key, the TV turns off but the tube filament remains lit | Power transistor q952 connected to the photo coupler | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| TV MITSUBISHI | 2097 | Outside the horizontal frequency | Changing the 1/63 volt c208 | jaironuness | |
| MITSUBISHI | TC-2018PS | I'm sound, mute | Micro m37372m6-325sp | Device without sound, it was on mute, when I replaced the computer the device started working again. | spectroneletronica |
| MITSUBISHI | TC2098 | Mitsubishi md tc 2098 tv that doesn't fire, the power supply's primary is all normal, the secondary voltages are all present and the led lights up normally. when we turn it on it makes a small noise and doesn't fire at all, I fixed practically everything on the control panel . | The defect was a shorted power supply transistor, I already replaced it and the solution was the transistor q952 2sc 1740 | Franklin | |
| MITSUBISHI | TC29 FS ... | Image folded a little upwards in the middle with return lines and at the bottom of the screen a small strip with a small fold on the sides. | In the 35v power supply formed by the flyback tsound is a 3,300uf by 40v capacitor, with low capacitance. | It was replaced for a new one and it was... ok. | Armando |
| MITSUBISHI | TC2118 | The TV turned on normally but the colors were as if it were in NTSC or PAL-N OBS. it's not palm | I replaced the x603 and x601 crystals. It didn't solve the problem. I replaced the ci m52771-asp. It didn't solve the problem. I almost went crazy. So I used it and demagnetized the tube. | With the demagnetized tube the problem was solved | otecnico |
| MITSUBISHI | TC1418PS | It just stays in stand-by at +b normal voltage | R-571 amended | Replace the same value and 8r2-3w metal film | samuel leite |
| MITSUBISHI | TC-1499 | No image, normal sound, no characters. | No image, normal sound, increasing the screen shows the plot, does not show characters. incorrect voltage on pins 25 and 26 of ic701. defect q705 (c1740) shorted, I put a c1815 in its place. Note: c703, 704, 705, 706, 707 and 710 (1 µf) had very low capacitance and should be replaced. | ||
| MITSUBISHI | TC-2999 | Tv mitsubishi tc-2999 no picture, normal sound | Mitsubishi tc-2999 tv without image, normal sound, normal mat and filament. As the screen increases, retrace lines appear. does not show characters. defect r680 (100k 1/8w) open on the kinescope board. | littlecarlos | |
| MITSUBISHI | TC 2010 | TV starts power supply with +b very high +- 200v instead of 115 | Ci audio output short (It's a good idea to always check if tsound isn't even a short in the secondary) | DEBIQUE | |
| MITSUBISHI | TC2098 ....... | Image shakes. | Open and close the lines that form the image frame and turn off the TV. | Cold solder on the vertical output IC and nearby capacitors and also resolder the chroma IC terminals. | Armando |
| MITSUBISHI | TC-1418PS | Str g5653 getting very hot and burning | Diode d913 1n4148 open | Resistronic |