PHILCO TV Repair: Common Faults and Solutions.
Search: PHILCO
Results: 4741
Results: 4741
PHILCO Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | PH32N62DGB | Sometimes it works and after a while the screen turns off as if it were the LEDs, a normal 12 and 5v power supply | Capacitor ec17 (100mf/100v) low capacitance | Replace and run to receive the farpel | Eletronica Maranata |
PHILCO | PH24T21DG | Does not turn on, turns off by itself | Software update | After updating, when turning on the TV it shows characters from the software mask, so you have to enter the service menu (image user/contraste/9735) and turn off factory hotcke, see the video at the You Tube link: https://www .youtube.com/watch?v=rfmifuv88fa&feature=emb_rel_end | MIGUELTV |
PHILCO | PH21MSS | No voltage on the power supply secondaries. | C803, 400V/220UF Open, R804 1K Open and PWM Generator IC (NCP1337P). | Replace the aforementioned components. (tec edfersom, varjota-ce) | Edfersom |
PHILCO | PTV43E60SN | TV turns on, but the LEDs do not light up | Qp411 and cb6 near ci ub1 | Remove qp411 and jam from the emitter to the collector, and remove cb6 (solved) | FRANÇA-MACAIBA |
PHILCO | PH42 LED A2 | Standby LED on, but TV won't turn on | Problem with the power supply board | Replaced the power supply board and the TV worked | Eletronica Muniz |
PHILCO | PH21 SS | Dark band horizontal left side and does not adjust in service mode | Replace vdd 483 diode | Raul de saja eletrônica r.e | |
PHILCO | PH24M A LED | No audio, sometimes it comes out and cuts | Q 601 and 602 smd next to the audio ci | Removing both leaves them without and the TV still mutes | GDP2 |
PHILCO | PH21B | Vertical closed, only 4 fingers open at the top, voltage between d566, 564 with 12v | Transformer pin -14 with cold soldering, this is what powers the d564 | GDP2 | |
PHILCO | PH32U20DSGW | Doesn't start. | Short circuit in the secondary 12v line of the power supply. smd capacitor positions c997 and c1000 short, and ci position u809 defective, inputs 5v and 12v but does not come out at the terminals (5 and 6 outputs 5v) and (7 and 8 outputs 12v) | Changing the capacitors, use two 10x16v or one 22x16v, and changing the ci me4953 | rafaelmoraes99 |
PHILCO | PH32C10DSGWA | Does not turn on, LED blinks very weakly. | Defect in the optical coupler. | Changing the optical coupler. | Alex Wille |
PHILCO | PCM 1446 | LED blinking, with distorted sound and closed vertical, sometimes bdm worked | Shock coil l 701 with intermittent continuity | Replace the l 701 for a new one and trust in God.... | Paulo Sertel Novembro 2020 ano da pandemia |
PHILCO | LCD PH 42M2 T420GW09 | Vertical lists | After warming up, vertical lists appear with sound | alci fiorin | |
PHILCO | PH21MSS | No sound, total mute | Change resistor r608, 18k, next to the output disconnector | DJ PITUKA | |
PHILCO | PH42M61DSG | Stand by red and does not turn on | Replacement of regulator 805 (1117-33) | Moraes | |
PHILCO | PH42M6161DSG | Stand by red and does not turn on | Replacement of regulator 805 (1117-33) | Pakuko | |
PHILCO | PTV32G50SN | No image, curtain effect | T-con | ||
PHILCO | PTV32G50SN HLS78D | Doesn't start | Replace of power supply resistors rp34 and rp29 (near the trafo and dp7...) | Replace of power supply resistors rp34 and rp29 for 0.1r x 1w | Mauricio-FOCONET |
PHILCO | PH40E36DSGW | Heats up turns off | Leak in the 1mf smd c111 capacitor - just change it | It is next to d5, next to q8, between the micro and the screen's flat cable | SANTOMEL |
PHILCO | PH49F30DSGAW | Doesn't start | Integrated uw1 (qkp36r by , transistor qw2 (t70r380p, resistors rw 6 (360r), rw7 (r300), and rw12(75r) | SANTOMEL | |
PHILCO | PH49F30DSGAW | Doesn't start | Shorted transistor qw3 (mod14n25) | SANTOMEL |