PHILCO TV Repair: Common Faults and Solutions.
Search: PHILCO
Results: 4741
Results: 4741
PHILCO Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | PH49F30DSGAW | After a few minutes, the screen goes off and tsound is sound | After changing the LED kit and still soldering the wires directly to the LED bars and also to the main board, it didn't solve the problem. | Replace the main board | SANTOMEL |
PHILCO | PH43C21P | Audio cutting sometimes works and stops | Check current transistor q702 that makes the mute | Replace transistor q702 | Luiz videotek |
PHILCO | PH40U16DSG | Calls whenever you want, sometimes doesn't call | Capacitor cp-105 slightly swollen | Replace for another equal or equivalent 400x100f | Maike Sorriso-MT |
PHILCO | PH40U16DSG LED | Heating power supply regulator | Cp105 100x400 low | Trace without testing good luck | Jhone eletronica |
PHILCO | PH40D10 | Does not turn on or 12 volt standby LED varies | Dp202 1n4007 open swap | Replace dp 202 | juci |
PHILCO | PH21M2 | Low sound, | Replace microns. pins 59 and 58, output 2.5v, it was with 7v and the other with 0v. | DJ PITUKA | |
PHILCO | PH32E32D | Does not come out of stand-by | Ci u807(1.8v regulator) warming up. stand-by on and does not turn on. | Bga microprocessor replacement. msd1309px-lf-z1 | Kabo Informática |
PHILCO | PH58E51 | Doesn't start | Tea 1752 | Replace tea 1752 r 10k which feeds pin 16.tea 1755t also. | Eletrônica Lelo |
PHILCO | PH32U20DG | Doesn't start | Shorted processor board | Replacing capacitor c1000, c997 and ci u809 | sergio |
PHILCO | PH32E32D LED | Does not turn on, only the red LED is on | Ci 1117-18 (1.8v regulator) of the main PCI damaged | Replace of ci 1117-18 (1.8v regulator) | sergio |
PHILCO | PH28N91DSG | The LEDs don't light up | Power supply capacitor exhausted | Replace all electrolytic capacitors in the power supply | EletronicaAlmiro |
PHILCO | PH40D10 | The standby LED doesn't turn on | Raw in the smd capacitors c1000 and c996 with leakage the raw in it ci u908 (me4953) | Make the replace (in my case I took it from a scrap yard!) | orlando lott |
PHILCO | PH14 | Turns on but jumps from channel 3 to the av and locked keyboard functions | Cristal 24.576 | Crystal replacement 24,576 | Raimundo técnico |
PHILCO | TP2054 | The TV arrived turning on with just a screen full of random spots on the screen and no OSD, during the tests it ended up stopping showing any image, (it wavered and cut out after about 5 s) then the stand-by LED kept blinking. | Ci does everything broken. | Replace the same. (tec.edfesom varjota-ce) | Edfesom |
PHILCO | PH14 GAME | The alloy presents all the tensions necessary to create a plot, but it doesn't. | Kinescope, defective. | Replace of the same. (tec, edfesom, varjota-ce) | Edfesom |
PHILCO | PH20U21D | Doesn't start. | Short circuit in the power supply secondary. 12v short circuit. | Smd capacitor c801 in short circuit, close to ci u801. Place an electrolytic capacitor of 0.1u x 25v. | rafaelmoraes99 |
PHILCO | PH39R25DSG | Does not work with control | Use one of the buster and go for the hug | julinho da eletronica | |
PHILCO | PH40E60DSGWA | Doesn't start. | Short circuit in the power supply secondary. 12v short circuit. | Smd capacitor c1d2 short circuit. Place a 10u x 25v electrolytic capacitor. | rafaelmoraes99 |
PHILCO | TP1452N | Burning fuse f901 | Shorted q901 (fet transistor k2740) at the power supply. | Ademir tc | |
PHILCO | PH58E30DSG | Turns on and after a minute turns off. | U201 viper 17l super hot. | On the 3v3 power supply dropping to 1.02v. | guinga sdia goias |