Search: PHILIPS
Results: 14170

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPS20PT228A
LO1.2L.
Tv turning offR.3417 . open.geraldo eletr.c.grande
PHILIPS21PT6446/78
Vertical with closed top and three colored linesElectrolytic capacitor 2464 and 2465 with low capacitanceReplace themeletrônica BRITO
PHILIPS21PT8467
Vertical fechado3445 open 7463 shortedThis email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS20PT3331
Totally inoperativeSaturate. Saida HorintalAfter changing. horizontally, the TV turns off after 5 s. Then I just adjusted the screen and everything went back to normalROMILDO
PHILIPS29PT554A
Dark screen with retrace lines (normal sound), actuating the screen only increases the retrace.R3340 pci do cinescopiopy3ig
PHILIPS21PT9647
Turns on normally but after three seconds returns to stand-by18v zener diode shorted (zd 303)Replace iteletrônica BRITO
PHILIPS21GL1369
Normal image but all red, blue, or green.Swap the three RGB output transistors.OkThis email address is being protected from spambots. You need JavaScript enabled to view it.(floripasc)
PHILIPS21PT5433
Works for approximately 10 seconds and turns offFleibk desk tripod malfunctionildefonso
PHILIPS25PT5536
Blue screen retrace lineTube with shorted gridKnock slowly on the neck of the tube/when it comes out, it doesn't come backladmyr
PHILIPS20PT3331
Do not connect the power supply transformer making noise and the power supply does not armHorizontal output shorted bul312p I changed the function but it got hot until it burned, the fly back iron was broken, the ferrite was out of placeReplace the sound and place another iron to hold the ferriteeletroclaudio aguas belas
PHILIPS29PT4635
L01.1L
1 it didn't turn on, 2 it turned off as soon as the image appeared1 tr smd pdtc143 posiçao p.c.i 7462 / 2 tr smd posiçao p.c.i 7450Magayver
PHILIPS20PT4331
Screen with vertical closed about 10 centimeters at the bottomEnter service mode and VSL, which is 33, was zero, increase it to 33 or rewrite or change the epromeletroclaudio aguas belas
PHILIPS21GX1666
TV had a reduced frame in both hor/vertC2531 47uf 160v, like low capacitance
PHILIPSPT 2078
TV stays on stand by doesn't turn on, doesn't arm goes back to stand byC2551 160v 47ufI replaced it and I'm newThis email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS21PT5437/78
Dark screen with osdR3442DANIEL SOLÂNEA PB
PHILIPS20PT122A/78
TV with audio and no brightness (dark screen)Tsound is no voltage vg2 that comes from the line graphReplace the line transformer 0v2094/41samuel leite
PHILIPS20PT120
Works normally after a few seconds reduces the frame and lowers the power supply voltagesMc-44630apReplaceFrighetto ALT SAT (66) 3534-1716
PHILIPSPT3331
L03.1L
Help other colleaguesValfredo Lima
PHILIPS21PT6456
Sound on bad tv, normal avStereo did not identify the channel, in normal avC 2205 10μFwww.rmeletronica.com.br
PHILIPS14 POLEGADA
Fuse is blowingA diode in the power supplyAnd just test all diodes in the power supplyjerfeson