PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14170
Results: 14170
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 21PT5,37/78 | When it turns on it makes squeaking and clicking noises and turns off | When it turns on it makes squeaking and clicking noises and turns off | jose wilson | |
PHILIPS | 29PT5642 L04U AA | Vertical folded and short at the top | When turned on, 3 colored stripes appear and after the TV opens the image the vertical one is short and bent | Troque o capacitor 2465 10x100v | Eletroinfo |
PHILIPS | 14PT3131 | When this TV was cold it wouldn't turn on, it had to be warmed up first so that the image could appear, apparently being a capacitor or transistor. | The photo coupler while it was cold presented the defect when it heated up the defect disappeared and the TV worked, | Replace | eletroclaudio aguas belas |
PHILIPS | 29PT4635/78 | TV turns on with retrace lines and after a few seconds it turns off | 3494 open resistor | Replace resistor e ic do rgb 7330 | taquari eletronica |
PHILIPS | 29PT4635/78 | Vertical half closed | Oxidized tube coil | In my case, I disassembled it and spliced the wire that oxidized | luischapinoti |
PHILIPS | 20GL1346 | Image just the frame without definition in the image | I checked the power supply was normal so I checked the value of r3248, when the ci 8361-3y the resistor is 47k, if it is 8361-5y or 4x the resistor is 8k2 ok? | JUVENAL PICOS-PI | |
PHILIPS | 21PT6456 | Burning but 11apx | I replaced it with another of the same value and it burned... I think it was of very poor quality. | I put the bu1508dx in its place and it worked beautifully without getting hot. | ELETRONICA SÃO FRANCISCO - BARRAS - PI |
PHILIPS | 29PT5645 LO4U | Does not turn on, nor does the stand-by LED light up | Tea1620 and r3532 of 4r7 and r3538 of 1r8 smd yes cast iron | Replace the same ones for new ones | eletroclaudio aguas belas |
PHILIPS | 29PT6456 LA | Vertical closed | Shorted smd 6457 diode | edtv | |
PHILIPS | 20PT529A | Does not turn on, does not light up, the inoperative LED | Coupler | Replace the same one for a new one | eletroclaudio aguas belas |
PHILIPS | 14PT3336 L03.6L | Turns on the image appears and turns off in 5 seconds | Open 10k resistor r3475 | eletroclaudio aguas belas | |
PHILIPS | 21PT5433 L03.1 | Turns it on and before the image appears it turns off the LED and it won't turn on again, just unplug it. she returns and repeats the same procedure | Defective tube socket | Replace the same one for a new one | eletroclaudio aguas belas |
PHILIPS | 20LG1049 GR1-R03 | Reduced image without synchronization | Crystal 3.58 plastic format | Crystal replace | GENIVALDO |
PHILIPS | 29PT9467 | Turns on normally with sound, lights up filament, without screen voltage and without image | Leaky pipe socket | Bruske | |
PHILIPS | 29PT552A L9-LLS | LED keeps oscillating, turns on, doesn't turn on | Vbat voltage too high | Changing the two capacitors, c2450 and c2551, 47/160v, the TV was awesome | ffeet |
PHILIPS | 29PT458A/78 * | Works normally after 2 hours and turns off loudly with 3 vertical lines, after it turns off the first time it goes away. | I replaced the socket with someone else's information, and it was fine. | Your replace | wagner |
PHILIPS | 20PT4331 L03.1L | Totally unfocused image showing 3 blurred colors (green, blue, red) implying that it's a socket | Q7463 bc546 short between collector and base | Replace the q7463 tv got a 10 | JOSÉ GUSMÃO |
PHILIPS | 14PT316A/78R | Power supply does not work, oscillating | Chap. 2530 and 2540 at power supply | Replace both ok. | fabiusmax |
PHILIPS | 14GL1316/78R | No image, no OSD, normal tube, normal filament just doesn't show up in the image. | In 7207 TDA4661 Ruim. | Replace ci 7207 tda4661 | PALAURO |
PHILIPS | 28PT800A FL1.17 | Does not start. red display on. protection activated | See line transformer, diode 6536 (byw29f) and smds 7541, 7541, 7542 | Divercentro |