PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14170
Results: 14170
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 14PT3131/78R | Turns on with vertical stripes and turns off | Broken trail | Call (j9518) to (c2447) resolved | NILTON-AVARÉ-SP |
| PHILIPS | 14PT110 | When you press the channel, the LED blinks a few times and it doesn't turn on | Resolder c 2442 or replace it (the same and smd) | ANTONIO NOBREGA [PATOS.PB] | |
| PHILIPS | 29PT5408/01 L04E.AA | It only worked for a few seconds. The LED blinked 5+11 times. | Trc with unbalanced gain. | Cleaning the cannons (rejuvenation) and it was ok. | Cunhas |
| PHILIPS | 29PT4635 LINHA PT | TV turns on and off or is already activating the protection | The burning of the bu4508 is due to excessive heating, changing the gain of the transistors 7461 and 7463 for better performance of the device, you can place the bd136 and bd137 transistors in their respective places and also change the 47x25v capacitor c2455 it will no longer bother you | berga | |
| PHILIPS | 14PT110 | When I pressed channel, the LED gave a few quick blinks and it didn't turn on. | C 2453 1000uf 35v tsound is no point in measuring, you can change it directly | ANTONIO NOBREGA [PATOS.PB] | |
| PHILIPS | 105S5 | ~1mm horizontal line in image | Loose welds on c710 and r720 | Resolder c710 and r720 (which are located very close to the fly-back), or even a possible replace of components | Dark Fox |
| PHILIPS | 29PT5645 | Turns on with black screen and three lines and turns off - vertical | D6457 smd in short and elect cap. from the vertical outlet | maxell | |
| PHILIPS | 14PT3331/78R | Sem audio no fi (off normal) | C2201 e c2202 | Replace the two close to pin 31 of the handyman | Jarbas Santos |
| PHILIPS | 14GL1015 | No image normal sound dark screen. at the top tsound are some colored lines that | Replace capacitor c2410 de 100uf 25v | eletroclaudio aguas belas | |
| TV PHILIPS | 20PT3331/78R | Vertical closed, on and off | Open resistor | Resistor 3448, and arm | guimas eletronica sm, santo antonio das missões |
| PHILIPS | 20PT3331/78R | No audio no fi | C2444(no capacitance) | C2444 replacement | jarbas santos |
| PHILIPS | 20PT4331 | No sound, increased after a certain time | C 2444 (470 uf) changed | Is close to the fly | cabeção natal |
| PHILIPS | FW-C380 | Crackling sound, as if connecting and disconnecting the speaker (like bad contact) I tested everything that is part of the audio and nothing, I even changed the ci 7501-tda7468, and the 4558 without success | Capacitors c2601, c2602 1nf smds at output 12,17 of the tda 7468 and that's it | az09(elizeu) This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| PHILIPS | DVP3254K | Sound i am | Ce26 =220/16v with leakage | Bruske | |
| PHILIPS | 14PT110B | Image pushed to the left side and without OSD | Tda 8660e from line 5 y | Replace for one of the same good luck | EVALDO GOMES URUÇUI-PI |
| PHILIPS | 14PT110 | As soon as it turns on, tsound is little shine, slightly off focus, very strong color, appearing to be a tube. | Dark screen gradually brightens | The only defect was the tube socket. | This email address is being protected from spambots. You need JavaScript enabled to view it. |
| PHILIPS | 20PT3331/78R | Closing vertical top | C2465(10u/160volt's) | jarbas santos | |
| PHILIPS | 21 PT9467 | Stop | Resistor 39k aauterated breastplate ci da power supply | ||
| PHILIPS | 29PT4635 L01.1L AC2K3 | Does not turn on, the LED sometimes lights up, the voltage at the base of 7461 and 7463 was 0.11v and at the emitter it was 0.37v, the other voltages were all normal. | Solution: transistor 7406 bu4508dx -> horizontal output *note: the low voltages made me change the transistors 7461, 7463 and the capacitor 2455 but after changing them the voltages remained low, so I concluded that this was due to a short in the secondary of the transformer 5461 this is because of the transistor 7460 -> horizontal output which was burnt and causing a small leak between collector and base and as its base is connected to the secondary of the 5461 this caused a short in it which was reflected in the primary and killed the voltages of 7461 and 7463. | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| PHILIPS | AZ1134 | Cd after a while of use gives an error | 6 volt power supply from CD dropping | Replace q3, q7 and q11, place bc337/25 close to the board | ars |