PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14168
Results: 14168
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 40PFL5606 | Turns on the screen and then turns off | Poor contact in the LED connectors | ||
| PHILIPS | 40PFL5605D | Inoperative. in the zd 905 diode it oscillates between 11 and 20v | BS260 diode, with slight leakage, you can put two SB360 in place | ||
| PHILIPS | 39PFL4707G | It would turn off by itself, sometimes the sound would disappear, it would creak before turning off. completely crazy. | Update the software | ||
| PHILIPS | 39PFL4508G | Doesn't start. sometimes it even turns on | Pin 4 of the rt8288a ci raised and placed a 100nf capacitor on pin 3 | ||
| PHILIPS | 39PFL3008D | Turns on, the backlight turns on, but tsound is no image. power supply voltages (715g6050-p02) normal. | Ic up1 (cm501). In some cases, heating the ci with hot air solves the problem. | ||
| PHILIPS | 32PFL5606D/78 | Does not come out of standby | Corrupted memory data. on pin 6 of the 7702 memory, that is, ground pin 6 of the memory. see note. | ||
| PHILIPS | 32PFL5606D/78 | Doesn't start. with only 3.3v present, the other voltages are deactivated. | Ver 1m20 e 1d38 | ||
| PHILIPS | 32PFL5606D/78 | Sometimes it turns on and works for about 30 seconds, that's when it turns on. | Pci principal (bga?). | ||
| PHILIPS | 32PFL5605D | Doesn't start | Activate sdm mode and see if it will turn on normally. If so, check the options | ||
| PHILIPS | 32PFL4017G/78 | It turned on but it was stuck on the HDMI, but tsound are cases wsound it gets stuck on the channel | Update the software | ||
| PHILIPS | 32PFL4017G | Turns on normally but nothing works and it hangs on channel 3 | Update via pendrive | ||
| PHILIPS | 29SX8674 | Does not turn on, power supply pulsing | Damper diode 6904 by228 with leakage and transistor 7980 bd440 shorted causing the 5980 coil to burn | ||
| PHILIPS | 65PUS6121 | Psu off | Check q9101 | Mihai | |
| PHILIPS | 55PFL6007H | No hdmi port works | See si19387 that controls the 4 hdmi | C. Santos | |
| PHILIPS | 55PUS6162 | No voltages at the power supply. inoperative | See u9101(ssc3s121a) in power supply | C. Santos | |
| PHILIPS | 37PFL5522D | LED flashes but does not start | 5V voltage-free supply, IC NCP1207A | ||
| PHILIPS | 47PFL8404H | Hdmi inputs don't work | Check the ci that controls the hdmi ports tda9996hl | ||
| PHILIPS | 14PT3131 | Top line and bar of about 5cm at the bottom | Voltage at the collector of the fr7465 drops to -11.3v | Capacitor c2446 with the replace, the voltage normalized to -12.8v | samuel leite |
| PHILIPS | 42PFL7762D/12 | Does not turn on, standby LED is off | Check r409(8.2kω), transistor t402(3fw) and ci u400 (tea1533at) | Mário Martins | |
| PHILIPS | 42PFL3527H | The standby LED turns on, then goes off but does not start | Fotoacoplador ic9106(pc123) | EL817 can be used | Marco Marques |