PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14193
Results: 14193
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 37PFL5522D | LED flashes but does not start | 5V voltage-free supply, IC NCP1207A | ||
| PHILIPS | 47PFL8404H | Hdmi inputs don't work | Check the ci that controls the hdmi ports tda9996hl | ||
| PHILIPS | 14PT3131 | Top line and bar of about 5cm at the bottom | Voltage at the collector of the fr7465 drops to -11.3v | Capacitor c2446 with the replace, the voltage normalized to -12.8v | samuel leite |
| PHILIPS | 42PFL7762D/12 | Does not turn on, standby LED is off | Check r409(8.2kω), transistor t402(3fw) and ci u400 (tea1533at) | Mário Martins | |
| PHILIPS | 42PFL3527H | The standby LED turns on, then goes off but does not start | Fotoacoplador ic9106(pc123) | EL817 can be used | Marco Marques |
| PHILIPS | 48PFH5500 | Doesn't start | Verificar e substituir r9307(2,2ω/1/4w), r9309(10ω/1/8w), r9310(10kω/1/8w), r9311(750ω), u9301(ld5532), c9307(nc/47pf) | Martin | |
| PHILIPS | 43PUH6101 | Doesn't start | Diode d9105(sk5100) open. | Cardozo | |
| PHILIPS | 32PFL3605H/12 | The switch works normally and after a while it switches off on its own. | Failure of the power supply board, after some time, all voltages disappear including 5v. ic 901 (tny227pn) failure. | Substituir ic 901 | Alentejano1973 |
| PHILIPS | 32PHG5102 | TV turning on by itself | Badly counted to mass by pci principal | Landed, slept... lol... | Jhone eletronica |
| PHILIPS | 32PFL3403 42PFL3403 42PFL5403 LC8.1L LA | After a while, 5 to 10 minutes, it goes off and the LED flashes twice | Change in internal resistance in the speaker with an approximate resistance of 3.8ω | Replace the speaker or place a resistor in series. | |
| PHILIPS | 49PUS6412 TPM17.3E LA | No image, LEDs light up | T-con with lack of 15v vdd voltage | Check capacitors on the 15v line. c2305(10µf) | ERP-ASSIST |
| PHILIPS | 24PFT4022 TPN17.1E | Doesn't start. power supply inoperative. | Burned fountain | Substituir c9100 (100pf,) q9101 (stg6n65k3, ka65d) r9101 (0,33ω), r9111, r9112 (47ω) r9115 (470ω) ic9101 (pf6005a - 6 pin) | |
| PHILIPS | 24PFT4022 TPN17.1E | Doesn't start. power supply inoperative. | Burnt power supply switching transistor | Substituir c9100 (100µf 2kv) q9101 (stf6n65k3) r9111, r9112 (47ω) r9115 (470ω) ic9101 (pf6005a - 6 pin) | Pablo |
| PHILIPS | 32PHG4900/78 | Burning the LEDs reduces the current | Excess current in LEDs | Https://youtu.be/owehrvu9rfg | Eliel Batista |
| PHILIPS | 32PFL3605D 40PFL3605D LC10.1L | TV turns on and then turns off. standby LED flashing 4x. | One of the speaker coils open. main board triggers protection. | 6Ω speaker replacement | rafaelmoraes99 |
| PHILIPS | 48PFG5000 | White screen with no image, backlight on | Ca62 shorted on right side buffer board | I removed | Adrian Chapadão do Céu Goiás |
| PHILIPS | 55PUG6212 | Doesn't even turn on the LED | Unknown | Shorted 911 diode | Robison |
| PHILIPS | 32PFL4007D | Turns on, doesn't appear immediately or image | Memory error, flash memory defect | Remove the memory and re-record, or replace it with another recorded one | Gbrito |
| PHILIPS | 32PFL4007D | Turns on, doesn't appear immediately or image | T-com short | Changing t-com lg components | Gbrito |
| PHILIPS | 20PT3331 LO3.1 | Vertical closed and vertical transistors shorted | This TV works with bd135 and bd136 at the output, as today you only find half-assed parts on the market | In place of the bd 135 I put tip 41 and in the bd 136 I put tip42 just pay attention to the pinouts that from tip to bd replace the base and emitter pinouts | Luan Victrolas |