PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14171
Results: 14171
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 21PT5435/78 | Turns on the wire for 1 to 3 seconds and turns off, in which case it goes into protection | If the tube is Samsung, change the tube if it is not, tap the screen | 3 em 1 | |
PHILIPS | 26PFL3404 | Power supply does not turn on | R903 10k aberto | Moura | |
PHILIPS | 20PT528 | TV turns on and comes on with a dark screen and turns off giving a bright light on the screen | Vertical output to be shorted, in my case mine was shorted from pin 2 to pin 3, tda9302h has to have h at the end ok | It was just a matter of changing it and the TV went blank | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 20PT528 | TV turns on and comes with an all blue screen and no video retrace lines | In the tube socket there are 3 18 k resistors, one of them was burned out, I just changed it and the TV came back with an image file | As a precaution, check the other 2 18k resistors as they may be faulty | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 20PT528 | TV turns on and comes with an all blue screen and no video retrace lines | In the socket there are 3 18 k resistors, one of them was burnt, I just changed it and the TV came back with an image file | As a precaution, check the other 2 18k resistors as they may be faulty | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 28PW6515 A10 E | Does not work with remote control | R3004 burned | cwuam | |
PHILIPS | PW 6515 A10 E | Image but no sound, sound comes out on phones | T7711 smd shorted bc857b | cwuam | |
PHILIPS | FWM570/19 | It lights up on stand-by when starting, starts ringing and goes off, returning to stand-by, insisting Sometimes it works for a while and goes into protection. | Replace transistor 7506 (bc 847) on the over plate. | 7506 bc 847 | WAGGUINHO |
PHILIPS | 14GL1019 | Bright spot in the center of the screen when it turns off. | Wow! | Henderson(hndrsn) | |
PHILIPS | 16GL1330 GR1-AL | Green screen with retrace | Ic900 (tmp47c434n-3408) | ||
PHILIPS | 40PFL5606D | Fuse blown, shorted to board | Q602,d602 shorted | jefferson | |
PHILIPS | 20PT3331 | Signal through the channel selector is just hissing or intermittent | See 4k7 smd capacitor position 2201 on pin 31 | Ademar | |
PHILIPS | 14PT112 | Green screen with normal sound retrace | Bf 422 on tube plate | Replace transistor 7310 bf 422 | celito santo angelo |
PHILIPS | 21PT5435/78 | It turns off when the image comes on but if you disconnect the varicap pin from 33v it doesn't turn off | Voltage of 33 volts a little low with 25 volts, cause: 150k resistor 3459 open | After changing the 150k r3459, the TV was beautiful | EMBRATEX ELETRÔNICA |
PHILIPS | 42PFL3604 | Nothing works, not even stand by | Capacitor c 806 , 4,7 micro por 45o volts | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
PHILIPS | 21PT9467S | LED lights up and stays off | Exchange of q606, a1013 pnp, and exchange of primary r 2k2 r608. | joaomvjr | |
PHILIPS | 21PT9467 | White screen with retrace | Leaky d305 - leaky flyback | D305 flyback | ELETRONICA MAURI JUNIOR |
TV PHILIPS | 21PT232A/78 | There was no audio | A blown fusil in ref:t1,6a that receives power from the power supply transformer | CICINHO ELETRÓNICA DE ÁGUAS BELAS | |
PHILIPS | 21PT9467 | Horizontal output d5032. the correct one is 3dd5032. It has a characteristic of 1500v + d + 8a + 50w. hugs to everyone. | ROBERTO PINTO | ||
PHILIPS | 21PT5433 | Device stopped +b low around 60v +ou - . | Cause: leaky photo coupler. | adhemar caetano da silva (tecmil eletronica) |