Search: PHILIPS
Results: 14172

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPS40PFL5605D/78
Total shutdown.D707 and d711. I used the uf4004 because the 1n4004 is not a quick cut and here in Belém the material is complicated.I appreciate the tips from friends. ferraz, bruske and electronicaaeb.@gepe
PHILIPS14PT4331
When you turn on the TV, the image is a little blurry and turns off. It looks like a tube defect.R 3444 amendedEsper
PHILIPS32PFL3605D
Does not turn on or light up normallyPCI board defectI just replaced it and it was done!ELETRONICA AUTO TREVO
PHILIPS21PT5433
Noise in the sound on stereo channelsConfigurar lista de option byte ▬ob1 = 0 (tuner alps), 128 (tuner philips) ▬ ob2 = 192 ▬ ob3 = 64 ▬ ob4 = 224 ▬ ob5 = 72 ▬ ob 6 = 0 ▬ ob7 = 80eletronica ndn
PHILIPS29PT5645
Doesn't work avConfigure the following items in service mode 29pt5645/78 - op1 = 0 (alps tuner), 128 (philips tuner) - op2 = 160 - op3 = 128 - op4 = 164 - op5 = 250 - op6 = 42 - op7 = 0eletronicandn
PHILIPS29PT5645
Configure the following items in service mode 29pt5645/78 - op1 = 0 (alps tuner), 128 (philips tuner) - op2 = 160 - op3 = 128 - op4 = 164 - op5 = 250 - op6 = 42 - op7 = 0eletronicandn
PHILIPS21PT326A/78
Blinking ledReplacementFlybackfco
PHILIPS40PFL5615D/78
The television turned off by itself and wouldn't turn on again.Diode d911 shorted. replaced with 1n4004 for testing.I will replace it with the original later to avoid future problems.Ferraz
PHILIPS32PFL3404
Does not turn on sometimes there is only soundCapacitor azul cf01JARBAS A BRITO
PHILIPS42PFL3604
There is no 24 volt voltage at the power supplyNa power supply r849 10Ω smd e diodo d5 comum smdNa fonte r849 10Ω smd e diodo d5 comum smdedgardsdo
PHILIPS14GL1316
GR1-VA
Does not turn on with noise (the power supply oscillates but there are no secondary voltages).T 7348=c547, r 3348=11k e zd 6346=zener de 91v.FERNANDO S
PHILIPS29GX1899
TV turns on, has sound, has filament, changes channels, everything is normal, but with an image with a blue tone with faint retraces, without charactersReplace epromplay back
PHILIPS29PT554A
Inoperative, LED off (note: cap remains charged c2508)Diode d 6514 shortkrul
TV PHILIPS21PT9476C/78
SK41L
TV with images bending at the top defect in the vertical plateR309 .068r 2 watt changedcunha753
PHILIPS20PT222
Cold welding no cap. 2442 (smd)eletrônica BRITO
PHILIPSHTS3375X/78
Display off and fan runningShorted transistor and fetsReplace q905, q907, q918ELETRO CENTER
PHILIPS20PT3331
L03.1L
When turning on, 3 colored lines would appear at the top of the screen, then a white line in the center and it would turn offOne of the vertical drive transistors q7461 or q7452 replaced and resolvedLift the base and emitter and measure high scaleCláudio Jardim Paulista bx. Pe
PHILIPS21PT5435
Turning off before the image appears and there are times when it takes a while to turn off but with drizzle on the image when the antenna is placed, the channel appears and in thousandths of a second it turns offI changed the transistors 7540 (bc547b), 7495 (bc337-25), diode 6445, capacitor c2455 and photocoupler, there was no solution to the problem. Then I started to suspect that the problem was the seletronic which, when the antenna was placed, it turned off , then I disconnected the pin that receives the 33 volts, I turned on the TV and it didn't turn off, and by chance, I found a c2007 capacitor with rusty pins, I removed it and put another one in its place (10mf/50v), I turned on the TV, the image appeared and, defect remedied.Capacitor c2007, the cause of the defect, it is next to the seletronic, in addition to being rusty, it had a short circuit, causing the TV to turn off, we just had to replace it and that was it, the TV was broken.PATRICK
PHILIPS203331
L03.1L
Open resistor, replaceR 3445 = 1r pino 8 fly backOpen resistor, replaceBenê eletrônica Aalfenas
PHILIPS42PFL5403
TV works - image disappears, only the audio remainsT01T701 - carbonized pin -el41 -clean and jamEMERSON RIBEIRO