PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14168
Results: 14168
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 42PFL3007D/78 | No image with normal backlight | Check q=400 8 terminals in my case were toast, replace and image came back! | Replace the msm! | JOHN GAMES |
| PHILIPS | 20PT3336/78 | TV with very low sound, even though it is on 100. | Smd diode 6908 (near the audio output) | Remove from circuit without measuring (edfesom;) | Edfesom |
| PHILIPS | 42PFL3604/78 | It would turn on without an image, sometimes the LED would blink 3 times, before the backlight would blink and go out. | D810 in the 24v power supply shorted, when it was connected to the series lamp the 24v appeared but when activating the bl-on, it died | Replacement! | Edmaster |
| PHILIPS | 14PT418A L01.2LAA | Turning off in seconds | Diode 6413 1n4148 with leakage | Replace | EletroClaudioPE |
| PHILIPS | FWM998/78 | Does not turn on, only on stand by, mechanic does not perform the self-test, dead | No power on the CD board | Open inductor on the CD controller board, 100μH, | davi.sls |
| PHILIPS | 20PT3336/78 | When energized, the device simply gave a quick pulse to the power supply's secondary and turned off, keeping the primary capacitor (2503) with a residual charge. | Transistor (7540) smd, leaky. | Replace, (7540) (abs edfesom;) | EDFESOM |
| SMART PHILIPS | 43PFG5102/78 | Image flickers horizontal lines | Lvds cables leads | Cover 3 ways of the lvds cable with durex from left to right on the t-com ref: r743 | Medeiros/ Barbacena MG |
| PHILIPS | FW730C | Don't catch | They removed the CD system and the cassette system. | Ricardo b.v | |
| PHILIPS | 42PFL3604/78 | Turns on and then turns off the lights | A loud and clear pump | Just adjust the trimpots, no need to replace them. rw977=15kr rw978=220r | Eletronica Jambeiro |
| PHILIPS | 42PFL3403/78 | No image, normal sound. Sometimes the image appears normal and then turns off, leaving only the audio. | When opening it, I found that the backlight was turning off, I heard a spark coming from the power supply board, I turned it over and saw that the transformer that generates the high voltage for the lamps had cold solder, I just increased the area of contact between the solder and the pins. of the transformer and resoldered it, it worked perfectly. | EC | |
| PHILIPS | 40PFL9605/78D Q551.1L | Turning off, LED flashes 9 times | This model does not have a t-con board, the board is lg plde-p976a | Raphael's solution didn't work... | ROCHA VGA |
| PHILIPS | 29PT4635/78 | Does not turn on without any current in the secondary led off | Ci tea 15p07 | I replaced the TV and it started working again | Valmir |
| PHILIPS | 32PFL3018D/78 | The tuning was bad, with a distorted image on all channels | I downloaded the drivers from the Phlips website and reinstalled them on the TV. | Rosana | |
| PHILIPS | 32PFL3008D TPS10.1L | No image. Turn the back light on and off. | Eeprom memory u402 (w25q64fvssig) corrupted. rewrite or change the board. | As I had a plate in stock, I decided to replace it. hence the famous inverted screen appeared. the code used: 136. how to insert the code: 062598menu(little box)136, in sequence and without a gap. | Eletrônica R-Tec |
| PHILIPS | 47PFL5007G/78 L12M1.1L | TV with LED stand by permanently on, it doesn't turn on either via the keyboard or the remote, nor does it reset the board. | Transistors q603, q581, diodes d602 and d107 (I put a 1n4007 in its place and it worked) | João Aníbal | |
| PHILIPS | 39PFL4707G/78 | It works normally for a while but if you turn it off and on again it doesn't work anymore | On the main board defective 3.3v regulator u701 | Replaced and resolved | PATRICK ELETRÔNICA |
| PHILIPS | FX30X | Only dashboard LEDs light up | D3 shorted on main board | An sb3200 was placed in place and works perfectly | NEI |
| PHILIPS | FWM9000X/78 | When you increase the volume, the sound cuts out | M0s3,m0s2,m0s4,m0s5 = (todos pdpf18n50), d2,d7(u20c20a), d1,d6 = (u20c20c) | Replace them all. | |
| PHILIPS | FWM9000X/78 | Turning off (after some time on) | Svf5n60f (not weapon) position- m0s1 | NATO ELETRÔNICA | |
| PHILIPS | 21PT9467C 4B-1 (?) | Does not turn on, standby off | Horiz exit. shorted, driver transformer open, flyback bsc 3807 heating the output | Changing the output (d5032) I used a 2sc 6073, changing the transf. driver, changing the flayback, I used the bsc25n1571, it was great! | Geraldo de Petrópolis, RJ |