PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14168
Results: 14168
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 231TE4LB | Alloy but with white screen | Ci q4150 short on the main board next to the display cable, change it and run for the hug | Saltech | |
| PHILIPS | FX30X HC11 | Does not turn on, only LED is on | D12 on main board | I put an in4148 in its place | Paulo |
| PHILIPS | 26PF5321 | On/off at the same time | 100x25 capacitor c130 thank you electronica cr | EDMILSON | |
| PHILIPS | FWM139 | Display turns on, but no sound, CD and radio inoperative. | Defective 12volt power supply regulator, q906 collector with 14volts but only 1.4volts on the q906 emitter. | Replace electronic capacitors c924 and c913 | Arione |
| PHILIPS | 20PT3336/78 | Shorted flyback | Flyback | Changing the flyback jf0501-19865 replacing jf0501-19272 and jf0501-19255 I could put it on and run for the hug! | Sinai Santos |
| PHILIPS | 32PFL5604 | With sound without image | Works 30 seconds then disappears the image only the sound remains. | In my case, replace the A.T. tranfo. of the lamps. | carlinhos teesom |
| PHILIPS | 43PUG6102 | It turns on, shows the logo and then tsound is no video with an image and it has normal sound | Integrated memory u802 25l3006e | Replace memory | SANTOMEL |
| PHILIPS | 40PFL8605D | Does not turn on and LED blinks 3x | Crazy d501 changed, primary power supply board | Replace without measuring | Stiltec |
| PHILIPS | 40PFG6110 15.1L LA | TV doesn't turn on | Shorted power supply secondary diode | Diode replacement | Eduardo |
| PHILIPS | 14PT110A | Vertical closed but with normal tensions | Broken trail | I redid the trail it was ok | otacilio |
| PHILIPS | FX30X | Blue LEDs on, panel and remaining, inoperative. | D3 shorted, replace with ss2200 schottky diode | electronicssupplyparts - Gramado/RS | |
| PHILIPS | 32PFL4017 | Dead TV...it doesn't even turn on standby. | Ci u701 (main board) - input pin 3 (5v) and output pin 2 (3.3v). | If the output voltage is below 3.3v....replace! | Persio (TVCompany) |
| PHILIPS | 42PFL3403 | Doesn't start | U 150 short | Replace u 150 | cleber lima rs |
| PHILIPS | 32PFL3403 | Image with interference and/or just turning off after a few seconds. | After the entire power supply was revised, I thought it could only be a filtering failure on the main board. | Changing the capacitors, c2423 and c2420 both 10µf x 16vdc are close to the composite video connectors | Robusto |
| PHILIPS | 39PFL4007 | TV with inverted image after changing board | It only resolves if you update the pkg file corresponding to the model | Paulo Pinho | |
| PHILIPS | 46PFL3008 | Turns on black light without image | Shorted capacitor killing voltage on t-con plate. capacitor is close to ci tcon | Replace capacitor with same capacitance | Eletrônica Possamai |
| PHILIPS | 46PFL5615D/78 | Doesn't start. LED just blinks (three times). | Precision resistor r219 on the power supply board. | Morenito | |
| PHILIPS | 29PT4635/78 | The image turns on, scrolling from left to right, flashing back, making a strange noise and turning off immediately, then turning it on again, the image appears normal. | Capacitor 2455 of 47 mf and 25 v damaged or with a broken track. | Replace the capacitor | |
| PHILIPS | 32PFL3404/78 | Intermittent defect: interference in the image and sometimes a loud whistle from the speakers and turns off. | Leakage of metal capacitors, mainly 100uf, 10uf and 4.7uf. Another cause of this defect is the 27 MHz crystal, position on the board is x4. So, for those who have already done the old tip of washing the board and changing capacitors and it didn't work, look for the x4 crystal. | Replace the position crystal in the 27mhz x4 chassis, close to the processor. | IntelectoDigital |
| PHILIPS | 40PFL3605D/78 | 12v voltageless power supply only with 3.3v voltage | U110 (regulator as431) with leak. does not allow the 14v supply from pin 6 of the driver (u501) to pass | Replace the u110 (regulator as431) even if it appears to be good in multimeter tests. | Gênios Eletrônica - São José -SC |