PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14168
Results: 14168
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 42PFL3403 | Erasing screen | Cold solder on the c700 close to the inverter transformer | Resolda do c700 | Marcelo Piranga |
| PHILIPS | FWP2000X/78 | Does not accept power, only has a red standby LED on, 5 volt power supply speaking | 12v power supply on the power supply board is missing and the 5v that derives from it is also missing. | Replace d711 (her105) and check q704 fet (ao3401) and q706 fet (ao3402), both smd | MIGUELTV |
| PHILIPS | 42PFL5332/78 | Does not turn on, the blue light comes on, pressing the on and off button, the blue LED just blinks | Reverse right side, 02 cap 470uf x 35v swollen and reverse left side with 02 fdd8447l shorted | The cap 470μF 35v and fdd8447l components were replaced | AdFur |
| PHILIPS | 20PT529A/78 | Inoperative, nothing turns on when pressing the power button on the remote control, the stand bay led only blinks but does not help. heating the axillator with a hairdryer makes the tv axilla normal! | Aoxilator | Replace the aoxilator tda9570h/n1/a/0646 | Sinailson furtado |
| PHILIPS | 32PFL5604D/78 | When plugging in the socket, it comes with a blue screen, without IR controls and buttons. | A visual inspection has already determined, c-100, c-104 and c-87 "stuffed" | I replaced them and ran for the hug. | Robusto |
| PHILIPS | 170S6FS/78 | Turns on, shows video and turns off the screen brightness. | Capacitor c215 at the power supply. | Capacitor replaced. | KABO Info |
| PHILIPS | 29PT4647/78 | Disconnecting as if it were a weak tube | Changed coil 5342 on the kinescope board | By a resistor and 1r | JRN eletronica |
| PHILIPS | 29PT6456 | Turns on but the tube doesn't light up or sound | It has a burnt tantalo capacitor and has no identification | LUIZ SERGIO RODRIGUES | |
| PHILIPS | 32PHG5102 | Power supply with mosfet and ci reg smd and blown resistors | Replacement of ic9101, r9109, 9110, 9113, 9101, d 9105, q9101 and the cause of the defect c9126 | As it is difficult to find the schematic I will leave the component values r9109=10Ω, r9111=10k, r9110=47Ω, r9113= 1k, r9114=110k, r9146= 0Ω, r9101=0.27Ω, d9104,9105 ,9106=1bh62, q9101=2n6659 or k8a65d, ic9101=pf6005ag or pf6003ag, c 9126= 100pf/1kv | ROBERTO BRUSKE youtube |
| PHILIPS | 32PW8422/78 L05L AA | It doesn't turn on, sometimes it turns on and off, | Replace cap 2510 and 2511,22uf 50v, resistor 3401 47k. at the power supply | DJ PITUKA | |
| PHILIPS | 39PFL4707 | The TV turns on more if it turns off, it no longer turns on, the voltage on the u701 regulator is high. | Change the 3.3volt regulator u701 on the main board. | Replace u701 in the main. | <small>wellingtoneletronicasilva@ bol.com.br</small> |
| PHILIPS | 40PFG6309 | TV when turned on seems to work normally after a few seconds it restarts | Corrupted u402 flash memory replace | Paulo Pinho | |
| PHILIPS | 40PFG6309 | Gets a bluish image on tv and hdmi normal characters | Restoration is done and returns normal but after a while it turns blue again, corrupted memory u404 replace | Paulo Pinho | |
| PHILIPS | 20PT4331/78 | Alloy with a black band at the top of the screen and with retraction lines | Cause capacitor 2465 | Replace of the same | ASSISTEC |
| PHILIPS | 20PT4331 | Does not turn on pulsating power supply | Cause photo coupler and tr bc547b | Replace of the same | ASSISTEC |
| PHILIPS | 40PUH6400/88 QM15.2E | Turns on without image but with sound. | Defect in led bars | Pablo | |
| PHILIPS | 29PT8457/78 SL40 11 | TV turns on with a vertical risk, but shakes and turns off, but the risk doesn't reach from one end to the other | I replaced the 2µ2 capacitor c2415 with 160 giving 1.8... close to the horizontal fitting. resolved the problem. | Francisco Melo - Parintins-Am | |
| PHILIPS | 42PFL3403 32PFL3403 | Standby LED turns on but TV doesn't start | Resolder resistors and diodes next to the relay | RMSELETRONICA | |
| PHILIPS | 42PFL3403 | Standby LED turns on but TV doesn't start | Connect with the control | RMSELETRONICA | |
| PHILIPS | 42PFL3604/78 | Doesn't start | Mainboard repair | Check diode d4 and u14 close to the control connector on the main board. First activate the power supply if it generates 3.3v 24v then see if capacitor c168 and c159 is heating up. | JORGE TV TÉCNICA PARANÁ |