PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14173
Results: 14173
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | CP110 | Ht volts low at 60 - 70v instead of 140v | C2661 2200ยต o/c in chopper control network | ||
PHILIPS | CP110 | Hissing sound | Chopper transformer replaced | ||
PHILIPS | CP110 | Fuse 1653 blowing. | Check ic7670 - cnx82a; 4822 130 10025 ic7675 - 12 volt regulator;2822 209 81726 overvoltage panel 1005; 4822 212 23099 | ||
PHILIPS | CP110 | Function knobs on ctv fail | Check keyboard or replace ic 7840 (tmp47c432ap-8188; 4822 310 31849) or (tmp47c432ap-8189: 4822 310 31851). important: mount the metal shielding with earth to r 3276 | ||
PHILIPS | CP110 | Field foldover | C2574 | ||
PHILIPS | CP110 | Field cramping | D/j on l5663 or c2574 ( 680uf ) | ||
PHILIPS | CP110 | Field collapse | Open circuit r3574 120k. | ||
PHILIPS | CP110 | Field collapse | Dry joints 12v reg | ||
PHILIPS | CP110 | Field collapse | Tr7572 & tr7573 s/c r3568 & r3571 o/c | ||
PHILIPS | CP110 | Field - bottom half of pic missing | R3570 8k2 in fop stage o/c | ||
PHILIPS | CP110 | F1653 o/c | Later set have over volt sub panel if set has this and fuse blown replace cnx62 opto | ||
PHILIPS | CP110 | F1653 o/c | Later set have over volt sub panel if set has this and fuse blown replace cnx62 opto | ||
PHILIPS | CP110 | E-w faulty | R3599 47r 1/8w metal oxide o/c on crt base - check c2613 390nf o/c | ||
PHILIPS | CP110 | East west bowing | R3599 ( 47r ) on crt base & check tr7600 & c2613 ( 390nf ) | ||
PHILIPS | CP110 | Distorted verticals | C2633 100uf | ||
PHILIPS | CP110 | Display reverts to "f1" aft few secs aft sw on | Tr7739 bc548 s/c | ||
PHILIPS | CP110 | Dead, no start voltage to ic7669 pin 9 | Check c2656 (150uf 385v; 4822 124 42029), for open circuit. | ||
PHILIPS | CP110 | Dead with f1 in display - 145v ht present | Dry joint d6668 (15 & 12v supplies) | ||
PHILIPS | CP110 | Dead with "f1" in display | Indicates 12v supply missing - tr7739 in st/by cct leaky | ||
PHILIPS | CP110 | Dead with " f1" in display ( " f1 " means 12v supp | T7739 leaky |