PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14173
Results: 14173
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | CP110 | Dead pri ht low at 190v | Res cap c2656 150µ low cap | ||
PHILIPS | CP110 | Dead or lines in the upper part of the screen. | C2656 (150uf 385v; 4822 124 42029) open circuit. | ||
PHILIPS | CP110 | Dead no 11v pin 9 tea1039 ( only in start up ) | C2656 150uf or c2661 2200uf | ||
PHILIPS | CP110 | Dead intermittently | 140v ht high at 156v - no line drive, tr7630 bc337 line dr tr int o/c; dry joints tr7665 chopper tr coll | ||
PHILIPS | CP110 | Dead but11af ok + fuse ok tea1039 pin 2 at 2v ( no | Replace tea1039 | ||
PHILIPS | CP110 | Dead , 300v at but11af coll. low start volts at pin | C2656 oc. | ||
PHILIPS | CP110 | Dead - volts o/p from bridge rect low at 190v | C2656 150µ low cap | ||
PHILIPS | CP110 | Dead - tripping chan light pulsing | Loptx shorted turns 1-17 | ||
PHILIPS | CP110 | Dead - no st/by led | 22r safety res 3655 o/c | ||
PHILIPS | CP110 | Dead - mains fuse shattered | Check mains bridge rects & 150µ 385v mains smoother for shorts | ||
PHILIPS | CP110 | Dead - fuse ok 300v on collector but11. | But11 o/c base to emitter. | ||
PHILIPS | CP110 | Dead - fuse intact | Has high drive amplitude briefly at chopper tr at sw on - but11 chopper tr o/c b-e | ||
PHILIPS | CP110 | Dead - chopper tr may be s/c | C2656 150µ 385v o/c, d6672 byd33d in 32v supply leaky | ||
PHILIPS | CP110 | Dead | 1.6a fuse o/c; but11af s/c; mains rect s/c; also replaced cnx62 as precaution. still no ht - c2656 150µ cause | ||
PHILIPS | CP110 | Dead | C2162 0.47mfd ( near c2611 ) | ||
PHILIPS | CP110 | Dead | "f1" showing in display 1653 t1a6 wickman fuse open | ||
PHILIPS | CP110 | Dead | But11af , tea1039 , bridge rec diodes s/c r3659 ( 100Ω ) , r3658 ( 120r ) c2661 upgrade to ( 2 , 200uf ) & cnx62 | ||
PHILIPS | CP110 | Corrugated verticals | C2633 100µ 25v | ||
PHILIPS | CP110 | Corrugated verticals | C2670, 2621 22µ 250v | ||
PHILIPS | CP110 | Control micro processors | A production change has been introduced adding a shield to the control micro processor to prevent the processor being influenced by external fields. replacements will be supplied as a kit comprising the processor, shield and fitting instruction. the sh |