PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14170
Results: 14170
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 21PT5433 | Turns on randomly - exits the stby function without command | This symptom may occur at low temperatures in some ci 7200 versions | ||
PHILIPS | 21PT5433 | Turns off when changing channels or tuning | This problem may be caused by "por3.3v / 8v protection - error5", in this case check 7200, 7541, 7491, 7493, 7496, see details on page 20 - table 5.3 of the service manual. give priority to checking the 3v3 7493 regulator. | ||
PHILIPS | 21PT5433 | Appears dos/menu/characters/message - blinking | If the power supply uses the FET transistor fqpf7n80 in position 7521, the TV has difficulty turning on, sometimes it turns on and shows the message: err 576lo3lsi2.2 00000 000 192 064 224 072 000 080, capacitor 2585 must be eliminated. | ||
PHILIPS | 21PT5433 | Appears in the / menu, however, without an image | Check possible change in resistor 3449 (27k) | ||
PHILIPS | 14GL1010 | Stopping or acting protection | C508 680pf-3kv | ||
PHILIPS | 14GL1030 GR1.AL | Stopping or acting protection | C508 680pf-3kv | ||
PHILIPS | 29PT554A/78R | Power supply problem | The problem was in the infra sensor (7680), more precisely in pin 2, which was leaking and therefore took the voltage down by 5 volts (5vd). It took work, but this made the defect more interesting. who knew the sensor! | ||
PHILIPS | 14PT100G/78R | Just sprinkles | When trying to change channels, only the channel indication (OSD) appeared and no image or sound. When trying to auto tune, the entire procedure was carried out without any channel being detected or memorized. checking the tuner and its peripherals, I found r3009 (180Ω) open. His replacement brought normality to TV. | ||
PHILIPS | GR6-LS -26 E 29 POLEGADAS | Loop on color channels (29) | Regulator 7905 | ||
PHILIPS | GR6-LS -26 E 29 POLEGADAS | Doesn't work | D-6505 (leak or short) | ||
PHILIPS | GR6-LS -26 E 29 POLEGADAS | Doesn't work | Ts 7502 (see broken terminal) | ||
PHILIPS | GR6-LS -26 E 29 POLEGADAS | Doesn't work | Pin 8 trafo soup (track that/) | ||
PHILIPS | GR6/AL/GR6LS | Vertical height and linearity | Geometry adjustment | ||
PHILIPS | GR6/AL/GR6LS | Drizzle in the canals | Adjust agc (pas/. c m. service) | ||
PHILIPS | GR6/AL/GR6LS | Loop on channels | Aft adjustment (step d m.service) | ||
PHILIPS | GR6/AL/GR6LS | There is only image on the av | Ts 7280 (with leakage) | ||
PHILIPS | GR6/AL/GR6LS | When increasing the volume it drops | Ic 7345 (micro) | ||
PHILIPS | GR6/AL/GR6LS | LED doesn't work | Str 7400 (power supply sops) | ||
PHILIPS | GR6/AL/GR6LS | Does not work LED flashes 6 times | Defective fly back | ||
PHILIPS | GR6/AL/GR6LS | Does not work LED blinks 2 times | R3537 (2k7) open |