PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14170
Results: 14170
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 14 GL 1316 | Does not receive video (a/v input) | By ci 8361 the video input is on pin 15, but the release of the same is done on pin 16 through tr.7203, which receives the micro command coming from pin 36 of the micro. I would continue with the oscillation. video signal to pin15 of the 8361. and checked the tr 7203 if the micro command is coming from the base and pin 16. Now I re-read your question and it seems to me that from what you explained, the defect is in the input block, with the oscillation. and just follow the signal in tr 7021, and 7023, 7024. I hope I helped.sds. milton2001 from rsdica sent by: lino---matuto | ||
PHILIPS | 20PT120 | When plugged into the socket, it would blink and the LED would remain on when activating the channel, but the LED would blink 5 times, and it behaved like this when pressing the channel again, as many times as desired. | Solution: 24w04 memory | ||
PHILIPS | 20PT220A/78R | When plugged into the socket, it blinked and the LED remained on when activating the channel, but the LED blinked 5 times and when pressed again it no longer blinked, keeping the power supplys normal. | Solution: it was the flyback | ||
PHILIPS | 20TP 120A | It was working, only on cable TV it only got channels above 43 on VHF it didn't find channels, | I changed the selector and the TV worked again ok!!! tip sent by: jair fco. silva teresópolis r/j | ||
PHILIPS | 14GL1010 | Loses horiz synchronization. and vertical, sometimes without high voltage. 1k r505 overheated | Capacitor c 130 (4.7 u f x 63 v) with loss of capacitance or high esr | ||
PHILIPS | CN | Retrace lines at the top of the screen | Capacitor c 400 (100 u f x 25 v) with loss of capacitance or high esr | ||
PHILIPS | CN | Dead | Resistor r 326 (5.6) open | ||
PHILIPS | CN | Dead | Capacitor c045 (22 nf) shorted | ||
PHILIPS | CN | Flickering image, retrace lines at the top of the screen | Capacitor c 406 (390 pf) leaking or shorted | ||
PHILIPS | CN | Rippling image | Capacitor c 868 with loss of capacitance or high esr | ||
PHILIPS | CN | Image not fixed in the correct tuning position, no audio | Capacitor c 155 (10 k pf) shorted | ||
PHILIPS | CN | Image appears only after some time after turning on the device | Fl coil (blue core) with altered internal capacitor. rotate the core slightly to confirm | ||
PHILIPS | CN | Lack of vertical synchronism | Capacitor c 868 (4.7 u f x 63 v) with loss of capacitance or high esr | ||
PHILIPS | CN | Remote control does not work | Capacitor c093 (100 uf) with loss of capacitance or high esr | ||
PHILIPS | CN | Absence of chroma | Integrated circuit cl 200 (tda3565) faulty | ||
PHILIPS | CN | Device on standby emitting noise (squeaking noise) | Integrated circuit ic 875 ( tda 2577) faulty | ||
PHILIPS | CN | When turned off by the remote, it turns on again, does not change channels, code F1 on the display | Capacitor c 093 (100 u f x 16v) on the remote sensor with loss of capacitance or high esr | ||
PHILIPS | CHASSI L9-SS | Dark screen, with audio | Transistor 7333 (bf 423) short collector/emitter and/or resistor 3347 (1 kq) open | ||
PHILIPS | CHASSI L9.2 A | Inoperative, remains in "stand-by" | Capacitor c 2675 (470 nf) shorted or leaking | ||
PHILIPS | CHASSI L9.2 A | Inoperative, remains in "stand-by" | Resistor r 3605 (22 k) with changed resistance |