PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14170
Results: 14170
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | CHASSI L9.2 A | Inoperative, remains in "stand-by" | Capacitor c 2601 ( 22 u f) com fuga | ||
PHILIPS | CHASSI L9 | Dead | Horizontal exciter transistor (driver) short base - emitter | ||
PHILIPS | ANUBIS | White screen, with excess brightness (effect similar to excessive excitation of the "screen" | Resistor r 3969 (3, 9) open | ||
PHILIPS | ANUBIS | Sound failing | Cold solder on headphone board ground cable | ||
PHILIPS | ANUBIS | Mat "high", high voltage leak, sparking inside the trc | Capacitor c 2446 (0.012 u f x 1600v)-damping cracked (broken) | ||
PHILIPS | ANUBIS | Colored lines in the middle of the screen ( g , rb). without osd | Faulty tda 3563 vertical scan integrated circuit | ||
PHILIPS | ANUBIS | Inoperative, stand by LED flashing 6 times | Horizc output transformer - (fly back) faulty | ||
PHILIPS | ANUBIS | Inoperative, power supply does not start | Resistor r 338 (33 k) open | ||
PHILIPS | ANUBIS | Inoperative, low voltages, weak blinking LED | Capacitor 2506 (47 uf x 25 v: loss of capacitance or high esf | ||
PHILIPS | ANUBIS | Dead, no plot | Resistor r 506 ( 27 kq) open | ||
PHILIPS | ANUBIS | Inoperative, power supply does not start | Capacitor c 2605 (100 pf) emc.- | ||
PHILIPS | ANUBIS | Inoperative - when it is turned off for a day it starts working again, stopping when changing channels | Cold solder on one of the ts-pins (fly back) | ||
PHILIPS | ANUBIS | Inoperative, releasing ts 423 comes without the characters | Altered or open resistors r 3607 and/or r 3606 | ||
PHILIPS | ANUBIS | Dead | Resistor r 3441 (22k) open | ||
PHILIPS | ANUBIS | Enters demo mode alone and randomly | Faulty control panel keys | ||
PHILIPS | 29 PT 652 A | Turns off by itself | Jumper 9914 with cold solders | ||
PHILIPS | 29 PT 552 | Sem "closed caption" | Capacitor c 739 (10 u f x 160 v) with loss of capacitance or high esf | ||
PHILIPS | 29 PT 552 | Stand-by LED flashing, device inoperative | Capacitor c 2463 (1k pf x 2 kv) in short circuit (it is close to ac | ||
PHILIPS | 29 PT 1898 | Dark screen, normal sound, when acting on the "screen" control return lines appear | Broken eeprom | ||
PHILIPS | 28 GR 7680 | Dead | Capacitor c 304 (47 pf) shorted |