Search: Panasonic
Results: 2880

Panasonic Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PANASONICTC20A10
ReplaceShorted vertical outputReplaceEletroclaudio Aguas Belas PE
PANASONICTC29A8
Flashing black bands in the image and the contrast does not workChange 100k resistor r564 position on the flay back sideeletronica newtec
PANASONICTC14RM10L
LED stand by blinking TV doesn't workDiode (d 810) shortedReplace and hope it's just thatBruno Nicacio This email address is being protected from spambots. You need JavaScript enabled to view it.
PANASONICTC14A04
Memory data is reset and does not store in service mode (note: it appears to be a memory defect, but it is not)D1131 and d1132 shortedReplacepaulo-maceio/al
PANASONICTC-20C20
Without power supply and with a noiseDaqqaqfabricio eletronica ponto final
PANASONIC29A11
Turns on standby and doesn't turn onR 808 e r809 (1r)HP ELETRONICA
PANASONIC29KL05
Relay keeps knocking and TV won't turn onIc 2101, shorted on the 5 volt line...the voltage drops on the 5 volt line of the ic851..Ic 2101 replacement...house eletronica ltda
PANASONICTC-29KL05
Burns horizontally when turned onDiode 557 (rh3g) shortedHP ELETRONICA
PANASONICTC20A12
When plugged into the socket, it goes into protectionR631 openR631 openalexandre
PANASONICTC-14A10
No contrast and does not tune channelsR106 open 56k 3w, r503 180 open 180k 0.5wI replaced the two resistorsPATRIARCA
PANASONICTC29Z99L
GP 41
Closed on the sides and with image foldingC568 1k/2kx polyester sold outAfter changing the capacitor the image was normalJOSÉ GUSMÃO
PANASONICTC14A12
Oxilizes and cutsMicroDisconnect pin 36.This email address is being protected from spambots. You need JavaScript enabled to view it.
PANASONICTC-29KL05
Very low soundIc-2101 msp3420gb8v3macceletronica
PANASONICSA-AK22
Does not turn on, stays on standbyQ571 2sc102 ou 2sc1741welljackson
PANASONICTC20A12
SONIVIDEOSVA@
A black stripe on the left sideDiode (d558) shortedBruno Nicacio
PANASONICTC-14A19
Without image it gets weird sometimesR106 (470k)I'm fineMarcio
PANASONICTC14C5
It has + b but it doesn't wobble9v ic806 and shorted vertical outputJust good luckeletroclaudiope Aguas Belas
PANASONICTC-29FX32L
GP41N
No image only soundAll power supply voltages ok, grid 2 (screen) had zero voltsShorted tube and it could also be the capacitor that goes on grid 2johnny busnadiego
PANASONICTC-14A12
BR3L
Blinking LED does not turn onD511 com fuga zener 10voltsD511 replacezigomoderno
PANASONICMODELO CT F2935S
Sound is the video, sound I am.Measured at different supply voltages. the 5v voltage was 3.8 volts at the output, I changed the filtering capacitor and the 5 volt voltage regulator, lm 7805, normalized the video, but tsound were still no channels and no audio, I changed the tuner and everything started working again. full.Replace 7805 regulator, faulty and replace of tunerValencas