Search: Panasonic
Results: 2880

Panasonic Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PANASONICTC20A12
Works for 1min and then turns on and offD102 shorted, heats up reg 7805 ic1202 and goes into protectionJcgiantomaso
PANASONICTC14A10
Does not tune channelsResistor da power supply bt (r106-470k)ReplacementDomingos da Eletronica
PANASONICSA-AK300 CD STEREO
Only appears on the display (f61)Cold solder on the transistors and on the sound output ICMarcone
PANASONICTC29KL05
Two side bars closing the horizontalPlease 753 large batch pincushion-inReplace q753firmino
PANASONICTC-14C06
Unfocused and blurred imageThe socket connected to the tubeReplace the socket connected to the rgb board connected to the tubejarbas santos
PANASONICTC-16C06
(blurry unfocused image)The socket connected to the tubeReplace the socket connected to the rgb board connected to the tubejarbas santos
PANASONICTC 14A10
Doesn't workCi 301=la7840 (only works with the original ci)Replace only with the original ci. ok?MARCONE
PANASONICTC14C7
Queima s.h. d2499Possible loose solder on the terminals of d566 which is connected to s.h. collectorBruske
PANASONICTC-20KL04
Turning offProtection circuitRemove the q520 and q580CAMP
PANASONICTC29KM03
TV works with closed horizontal, horizontal line on the screen, with sound, tunes channel.Capacitor polyester 0,39uf/250v c568Replace capacitortaquari eletronica - afonso ( teresina piauĂ­)
PANASONICTC-29G9L
Turns off immediately after turning on, having to unplug it to reconnect itR564 137k and r556 22k opennene
PANASONICTC21S1RF
Z5
No image. don't tune inC859 shortedThis email address is being protected from spambots. You need JavaScript enabled to view it.
PANASONICTC 20C6
Setting up protectionD835 diode shortedpardalzito
PANASONICTC-14A12
*
Turning off after 1 minute, and when it turned off, I noticed that the LED was blinking slowly, then it turned off with the key, it worked normally and turned off.C-519 its value is 22/160v I replaced it with 47/250v and it was normal again.Its replace for another higher value.wagner
PANASONIC29KL05
When turning on it makes a horizontal noise and turns offI will be outragedReplace the capacitor c 563 390k openitan
PANASONICTC29A10/29G9L
Doesn't startTriggers the relay from the power supply and then disarms it.Turning off the fly back the power supply voltage goes to more than 170 v. replace the fly back, the power supply only works with it in order. with the fly back in the circuit, the power supply goes to 88 v and immediately switches off.Secam
PANASONICTC29KL05
Horizontal closed with a line in the middle.C563 de 394jReplace and run for the hugserginhosond@yahoo
PANASONICTC20A12
When plugged into the power supply socket the voltage fluctuates and appears to go into protectionPower supply oscillating, change optocoupler, it goes into protection if grounding pin 36 of the micro TV remains connected in this case it was dz 511=10.8v with leakage.Bruske
PANASONICTC14A9
Triggers protectionVertical exit.ReplacementThis email address is being protected from spambots. You need JavaScript enabled to view it.(floripasc)
PANASONICTC29V50B
No audioIc 2302ReplacementThis email address is being protected from spambots. You need JavaScript enabled to view it.(floripasc)