Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | PCM1446 PCM2046 | The cutter works | Verifier R719 | Sequeira | |
PHILCO | PCM1446 PCM2046 | Turns off after a while | Verifier R706 | Sequeira | |
PHILCO | PCM1446 PCM2046 | Vertical closed | Verifier R601 (680K) | Sequeira | |
PHILCO | PCM1446 PCM2046 | The vertical shakes, the image twists, it seems out of sync | Varificar c205 (2,2/50v) | Sequeira | |
PHILCO | PCM1446 PCM2046 | Blinking led | Check l701 (open or with cold welding) | Sequeira | |
PHILCO | PCM1446 PCM2046 | Turns on and off after a while | Check r716 (100k) | Sequeira | |
PHILCO | PCM1446 PCM2046 | Turn on and off | Check r713 (100k) | Sequeira | |
PHILCO | PCM1446 PCM2046 | Vertical closed | Check diode 302 | Sequeira | |
PHILCO | PCM1446 PCM2046 | Don't tune in | Check c208 | Sequeira | |
PHILCO | PCM1446 PCM2046 | TV disarming | Check diode 302 | Sequeira | |
PHILCO | PCM1446 PCM2046 | Low power supply with 35v | Check str50103 | Sequeira | |
PHILCO | PCM1446 PCM2046 | Image without red | Check zd503 | Sequeira | |
PHILCO | PCM1446 PCM2046 | Contrast does not work | Check c716 | Sequeira | |
PHILCO | PCM1446 PCM2046 | White screen with scratches and no image | Check c719 | Sequeira | |
PHILCO | PH145 | Turns on for a while and turns off with the LED off. | Q6 and q7 d2 and d3 do not measure change (mpg plate) | Giovanne miguel pereira | |
PHILCO | PCM2044 | The image and the standby LED pulsing directly. | I changed r713 and the problem was solved. | HLM SOLUÇÕES ELETROTÉCNICAS | |
PHILCO | PCM1446 | No color | C118shorted | edezio eletronica | |
PHILCO | PCH1444 | No sync | Replace c 205 ,1 x 50v | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
PHILCO | PH 29 US A2 A2 | Closed bottom vertical | Cold welding no vd 564 | Resolve | Andre |
PHILCO | PCS2700 | TV doesn't work, c913 = 470pf shorted disk killed the power supply, after changing the TV it worked, but there was no (osd) that is menu characters on the screen (cause c612 = 10mf for 50v. no capacity). which sends a pulse to pin 2 of the micro. | Causes c913=470pf which killed the + b and c 612=10uf for 50 v. | Both capacitors were replaced and it was ok. | Armando de Olimpia,Eletronica EvoluSom. |