Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | PCM 1445 | TV works normally, when the image varies, a black stripe appears vertically | C= 721 as lack of capacitance | I touched and resolved | ELETRONICA MEDEIROS |
| PHILCO | PCM1446 | Inoperative TV turns on the key, it only comes with a whistle. | Capacitor 911 de 220mf/160v seco. | Replace and go for the hug. | eletrônicavinisom e tv |
| PHILCO | TPF-3221 | Closed the horizontal, it worked normally, the incision burns the exit h | C708 5n6/1600(about//i) | WARLEY CESAR | |
| PHILCO | PH21US AI | Turns on and off, vertical seems closed, the ci n401 - stv 9378 is good. | Transistor v502 open | Troque o v502 - c2383 | Paulo Sertel Itararé SP |
| PHILCO | TP2052N | It takes a long time for the image to appear | Profit | Renew it | Paulo Sertel Itararé SP |
| PHILCO | TV EMOTION 1445 | No rf frequency | Time of use or voltage variation | L=001 open I replaced it and a hug | ELETRONICA MEDEIROS |
| PHILCO | PC-2041 | At leak under the plate | Flyback, after changing flyback tv turns off after 30 seconds | Replace r723. After changing the image, it became opaque as if it had no open r722 contrast. | Osires |
| PHILCO | PC-2041 | At leak, under the plate | Flyback, after changing flyback tv turns off after 30 seconds | Replace r722 and | Osires |
| PHILCO | PCM2146 | Does not tune channels | Ceramic capacitor c133 com fuga | Replace the same | eletronica reis |
| PHILCO | PT-2052 | Does not turn on blinking LED is a sign of oscillation and goes into protection@@@ | Cap 6n8x1k6 | Help yourself, leave your tip ass. arni | EETRONICA ARNI-L. LEAL- SC |
| PHILCO | PCM 1451 | Dark screen with back lines | Resolves the cobos do cinescopco. | doglas mota | |
| PHILCO | PCS 2976 | Burning q701 | R721 smd 100r aberto | Replace r 721 | juci |
| PHILCO | TP-2010 | Stand by on, when you touch power, the LED turns off and then lights up. | Cold solder not resistor r-936, resolde-o, fica ok. | Cláudio Ribeiro, TECNOSAT ELETRÔNICA E INFORMÁTICA, JATAÍ-GO, This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| PHILCO | TP-1454 | No image through the antenna, screen a bit dark. normal av. | Sf201 short (fi input coming from varicap) | Manoel (Noca) | |
| PHILCO | TP-2054 | No image, sound ok and osd ok. | D602 (1n4531) shorted | Manoel (Noca) | |
| PHILCO | PH14D | Stand-by LED is off, TV does not turn on. | Resistor r839(82k) changed, r881a(82r) open, transistor q881(2n5551) shorted. | Replace them all, in place of the q881 you can put mpsa42. | jheliocavalcanti |
| PHILCO | TP-1454 | Vertical closed from the middle to the bottom. | D909,r910 and r912 | Dudi | |
| PHILCO | PH 21 US A1 | TV with LED on but does not generate | R 466 of 27k open this resist is connected to pin 8 ehto of IC ttda11145/tda 12165. | DANIEL | |
| PHILCO | PCS - 2952 | Green image. | Solution: adjust the fly screen. | BARRETO CRUZ | |
| PHILCO | TP2050 | It didn't pick up the channel on the AV, it worked normally. | Q-301 aberto (smd) e r-303 (smd) | Replace for the same as the original | ELETRONICA CAVALCANTE MARTINOPOLE-CE |