Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4741
Results: 4741
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | TP 1454 | Power supply stopped stand by does not light up | Replace directly without measuring d915 which powers the vcc of IC 901 pin 14 | pedrinho tela quente | |
| PHILCO | TP29C21 | Led power off wk +b not secondary | D915 with leak | D915 | |
| PHILCO | TP1453 EDEZIO ELETRONICA | Normal power supplys when turned on leave stand by and return to stand by | Fly bek | ||
| PHILCO | 29C21 | Closed horizontal | Causes c-1706 burst and r1701 open. | Solution to replace both. | Elias Alves (Eletrônica Modelo) |
| PHILCO | PCM 1446 | No color | Replace capacitor ceramico c512 10k | Almiro | |
| PHILCO | PH29US | Vertical closed | C567 160v 220 -d556 -d564 | ELETRONICA MARTINS UBATUBA | |
| PHILCO | TV PH21M | Nao liga, nem standy by | D813 open | HP ELETRONICA | |
| PHILCO | TP2054 | TV stopped doesn't work at all. | C909=4n7 for 2 kv. , short and tsoundfore fusion: toasted. | Both the capacitor and the fuse were replaced and resolved. | Armando de Olimpia Eletronica EvoluSom |
| PHILCO | PC1445 CPH05 | Image with little contrast and sound wheezing normal characters | C405 82pf shorted | Replace | PAULO-MACEIO/AL |
| PHILCO | TP2920 | When plugged into the socket, the stand by light comes on. I click to turn it on, it turns off the stand by, but after about 8 seconds the stand by blinks several times and it doesn't turn on | Capacitor c925 100uf\16v without capacity | Replace the c925 100μF\16v | Deusomar |
| PHILCO | TP2054 | Screen completely dark with channel sound, menu and character generator working; | The dz701 track was buried | Trail alert | Alextecnico |
| PHILCO | TV PH 21C | Completely blurred image. | Demagnetizer PTC defect. I changed it and solved the problem. | Gilcimar Rocha Pereira | |
| PHILCO | PH21M SS | Geometry | Service mode | "menu + contrast + 9735" | Miojex |
| PHILCO | PH21M SS | Dead | D 813 shorted fr104 | After exchanging it for a fr207, a tick appeared in the power supply that killed the 12v of the d813, the culprit was the zener d333(18v) which is out of its position, mounted with anode to ground and cathode in the same hole of a side of r813. | Ádrian Chapadão do Céu-Go |
| PHILCO | TV PH21 | Changed width. normal power supply has 105v if it is high it can affect the width | See r839 of 82k may be changed to + | Master Eletronica | |
| PHILCO | TV PH21 | TV doesn't turn on, power supply is low | Ver q 881 | Master Eletronica | |
| PHILCO | MSP201 PR | Only turns on LED stand by device inoperative | Go to the micro on the front plate oscillator of the micro capacitor smd pos c6 replace directly a hug the peace of lord jesus in your heart | DARCI FUHR | |
| PHILCO | PH29USA2 | Does not turn on, turns off by itself, does not come out of standby | Power supply transistor c2883 or zener vd581 6v2 | Replace v431 v502 v505 v574 vd581 (or leave it without the vd581 it works normally without it) | fernandocamarques |
| PHILCO | PCS2976 | Inoperative, LED off (note: cap remains charged c910) | Q 901 spa 11n60c2 | krul | |
| PHILCO | PH29 | Vertical closed in the lower half (image only at the top) | But counted on the solder of diode vd564 (-14v) | NV ELETRONICA - VALDEMIR |