Philco TV Repair: Common Faults and Solutions.

Search: Philco
Results: 4741

Philco Repair Guide: Common Issues and Fixes

Brand	Model	Fault	Detailed Problem	Solution	By
PHILCO	TP2054 CPH06	When turning on the TV, it generates high voltage, then turns off, the LED keeps flashing, attention on the +b, it only remains at 15V	Altered 6n8 polyester capacitor	Replace c715	renato moura
PHILCO	PH21SS	Alloy with 60% black screen on the bottom and 40% blue with shrink lines	Replacing the VD401 diode cold solder on the transistors V503 V505 V574	Worked perfectly	ELETRONICA AUTO TREVO
PHILCO	TPF-2130	It makes a dragging noise and turns off and the standby LED flashes.	Poor contact on c922 (220uf 160v) on the power supply secondary.	Resolder	Manoel (Noca)
PHILCO	PC20R42	No noise at the power supply	Horizontal side bu2506dx and 6n8 1k6v capacitor	Replace of the same	orlando lott
PHILCO	PCM 1446	LED lights up but doesn't start	Zd904 shorted	Replace	ELETRONICA MEDEIROS
PHILCO	PCM1444	Does not turn on, power supply keeps pulsing and with retrace lines	The reason for this defect is the fly back that leaks high voltage	Replacing resistor r 715 and fly back	ELETRONICA GAZZIN - felipe
PHILCO	TP20V56	TV doesn't turn on	Open r911, ic 901 oscillator, capacitor c 948 smd	Replace r911 2m2, replace ic 901 oscillator, replace capacitor c946 smd for ceramic 271k	ricardo quadros
PHILCO	TP2052N	No part of the LED goes out, it's the only part that stays on	Fly back		edezio eletronica es
PHILCO	TP2052N	After turning it off, it won't turn on again. Just let it cool then turn it on again	O c708 de 470pf2kv e c709 1k5 2kv ambos no horizontal	Direct replace	Ademar
PHILCO	PCM2046 -	TV turns on normally, but without characters (menu and channel number)	It's funny	Replace tda3653b	franciscoMc
PHILCO	PH21SS	Vertically closed up to 80% of the screen or closing from the bottom to the top and turning off in the latter case.	Replace diode vd564 (fr154) the byv27-200 can be placed. replace directly without testing.		flaviosel
PHILCO	PHT660	Dead	T1 shorted d18 and d20 shorted	Replace parts and that's it	orlando lott
PHILCO	PCS 2976S CPH04	Burning vertical outlet	R 919 and r917 causing high power supply	Replace r 919 120k without measuring	luiztvsom
PHILCO	PCS-2976 056022	It turned on and then turned off, turning off the standby light, when I turned off the deflector coil it turned on. From the beginning I thought it was the power supply but it wasn't.	It was the capacitors c730 and c715 with loss of capacitance	And just replace and run to the abrasion.	diego lima nova timboteua
PHILCO	PCM1446 CPH-05M	Sem osd	R714 (1k8)
PHILCO	TP20V56	Does not turn on, power supply inoperative	D915 (r31) shorted	I replaced the r31 diode with a 1n4148 and it worked fine.	digitec eletronica by lambarí d'oeste-mt
PHILCO	PH29C	Turns off in 5 seconds	No image, when the screen increases it turns white and turns off quickly (diode open)	Replace open diode d811	cesar_unitec
PHILCO	PCM2044	Sometimes it turns on and sometimes it doesn't turn on and the LED just keeps blinking	C706 22n close to the power supply output capacitor		edezio eletronica
PHILCO	PCS-2950	Vertical closed and burning la7838	La7838, zd601 and zd602 next to the fly back, were changed	Replacement	Eliel
PHILCO	PCM-2046	Oscillates and stops, makes a very strong horizontal noise	Pin 10 of the one chip shorted	Replace	This email address is being protected from spambots. You need JavaScript enabled to view it.