Philco TV Repair: Common Faults and Solutions.


AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HISENSE
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: Philco
Results: 4741

Philco Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILCOPCM1446 PCM2046
Blinking ledCheck l701 (open or with cold welding)Sequeira
PHILCOPCM1446 PCM2046
Turns on and off after a whileCheck r716 (100k)Sequeira
PHILCOPCM1446 PCM2046
Turn on and offCheck r713 (100k)Sequeira
PHILCOPCM1446 PCM2046
Vertical closedCheck diode 302Sequeira
PHILCOPCM1446 PCM2046
Don't tune inCheck c208Sequeira
PHILCOPCM1446 PCM2046
TV disarmingCheck diode 302Sequeira
PHILCOPCM1446 PCM2046
Low power supply with 35vCheck str50103Sequeira
PHILCOPCM1446 PCM2046
Image without redCheck zd503Sequeira
PHILCOPCM1446 PCM2046
Contrast does not workCheck c716Sequeira
PHILCOPCM1446 PCM2046
White screen with scratches and no imageCheck c719Sequeira
PHILCOPH145
Turns on for a while and turns off with the LED off.Q6 and q7 d2 and d3 do not measure change (mpg plate)Giovanne miguel pereira
PHILCOPCM2044
The image and the standby LED pulsing directly.I changed r713 and the problem was solved.HLM SOLUÇÕES ELETROTÉCNICAS
PHILCOPCM1446
No colorC118shortededezio eletronica
PHILCOPCH1444
No syncReplace c 205 ,1 x 50vThis email address is being protected from spambots. You need JavaScript enabled to view it.
PHILCOPH 29 US A2
A2		Closed bottom verticalCold welding no vd 564ResolveAndre
PHILCOPCS2700
TV doesn't work, c913 = 470pf shorted disk killed the power supply, after changing the TV it worked, but tsound was no (osd) that is menu characters on the screen (cause c612 = 10mf for 50v. no capacity). which sends a pulse to pin 2 of the micro.Causes c913=470pf which killed the + b and c 612=10uf for 50 v.Both capacitors were replaced and it was ok.Armando de Olimpia,Eletronica EvoluSom.
PHILCOTP-2052N
I got this TV with a shorted horz.bu2506dx output, I put in a monitor output, I noticed it was getting a little hotter, but I handed it in after 3 days. It didn't generate a problem, I'm going to put it to work even if it explodes or shows me on the screen wsound the problem is, tsound was 50vlts on the q 920 so I closed the emitter collector it worked but the horizontal one kept closing I thought it was a polyester capacitor because I had changed the bust and the output It was getting too hot so I took the super magnifying glass that was leaving me lol then I saw a subtle cold weld on the horiz.t702 trafo and that was the problemCold solder with yellow transformerNew welding doneastel eletronica sousa jurema ceara
PHILCO DVDPHT660/N
Doesn't startSecondary power supplys with low voltagesCapacitor e11 47 mf exhaustedCALIXSERVICE
PHILCOTP1452
1452		Normal league has sound and no imageCause it was r812 tsound was cold soldering it was soldering and the image appears on the TValex
PHILCOTV PH21C VERSãO B
Does not turn on stand by offQ881 (2n5551) short and r881 (100r) openReplacealvaro peralta