Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4741
Results: 4741
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | PCS2700 2900 E CPH05 | No writing (OSD) | No vertical pulse on pin 2 of the micro | C612 10mf, or r612 10k open | jasvan souza |
| PHILCO | TP-2920 | This TV arrived with flyb.furado. | When changing, it came without an image, but the rest of the functions were normal. Look at the 10k and 6k8 open on the abl line next to the fly back. | ELET.JN NEVES Ce | |
| PHILCO | TP-2054 | Image without contrast; little shine. rest, everything ok | Dz 701 (8.2v) shorted, on the abl line close to the fly-back. | Replace for new one. | Manoel (Noca) |
| PHILCO | PH 21C | Menu stuck | When asked for the password, type 4711 | paulorusso | |
| PHILCO | PCM-2044 CPH-05 | 'white noise', i.e. every time white letters (subtitles) appeared, it interfered with the audio. (second defect slightly varied the tuning) | Suspend pin 44 of IC 501 and change c205 to pin 48 (AGC) of the same IC) good luck to everyone. | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| PHILCO | TP2052N | Has sound, tunes, but no image only OSD (functions on screen), with colored lines in the middle of the screen | Check the 45 volts coming from pin 05 of the fly back. check this line. Check if you have 36 volts on the channel selector. From what I could understand, this tension influences the abl | caio | |
| PHILCO | TP 2052N | Power supply beeps and turns off | Play-back and the horizontal output with a small leak and the capacitor 706 changed. | DERCIO | |
| PHILCO | PC 1405 | Problems in vertical shrunken or def. linearity | Capacitor c609 e resistor r613. | Perse | |
| PHILCO | CPH01, PC1401 | Lacks width and the fly back makes a buzzing sound | Capacitor c913. | Perse | |
| PHILCO | PCM2046 | Intermittent defect, sometimes the LED flashes, sometimes it does nothing. 150v enters pin 3 of the str50103 and nothing comes out. It keeps emitting a buzzing sound at the power supply. | Solder the c 911 capacitor (220uf x 160v capacitor or replace it, it may be oxidized. | Perse | |
| PHILCO | PC 2043 | Image warping | C905 220uf | Perse | |
| PHILCO | PC 2004 | Horizontal dark bar | C 607 10 uf. | Perse | |
| PHILCO | PCM 2046 | Turns on and off with the LED | R 713 of 100k changed | Replace 100k r713 | Paulo |
| PHILCO | PH21SS 21C1PH02-2H | Vertical beam | Janpe w570 with cold welding | Resolder | EletroClaudio Aguas Belas |
| PHILCO | PCS2956 ? | With low power supply between 50 and 70 volts | Tl 431. | I replaced the tl431 and the TV wobbled. | This email address is being protected from spambots. You need JavaScript enabled to view it. |
| PHILCO | PC - 1443 | Ñ league. | Solution: replace capacitor 905 (385v/220uf) | BARRETO CRUZ | |
| PHILCO | PH 21 B | A vertical, horizontal, closed line | Capacitor c 441=0,39mf 400v | Replaced it, problem solved | DANGRA ELETRÔNICA |
| PHILCO | TP2920 | When turned on, it immediately goes into protection | Capacitors c1701 and c1703 | Replace item mentioned | eletronicaapolo |
| PHILCO | PAVM2920 | Loud humming at the power supply. works normally. | C-997 (2.2 /63v) with low capacitance | Replace for another of the same value | jolarsi |
| PHILCO | PH21 US A1 | Vertical from the middle to the top of the screen with lines and with the image turned | Diodo vd401 no vertical | Replace | EletroClaudio Aguas Belas |