TV Repair: Common Faults and Solutions.
Search:
Results: 87430
Results: 87430
Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| SONY | CCDF70 | No auto focus in tele mode | Auto focus will not focus in tele mode. | ||
| SONY | CCDF70 | Service mode and adjustment information | Servicer has requested service mode and adjustment proceduresfor this camera. how is the unit put in the service mode? are the codesthe same as the v11? -hq comments: please refer to ccd-f50/f70 supplement 1. | ||
| SONY | CCDF50 | Service mode and adjustment information | Servicer has requested service mode and adjustment proceduresfor this camera. how is the unit put in the service mode? are the codesthe same as the v11? -hq comments: please refer to ccd-f50/f70 supplement 1. | ||
| SONY | CCDF35 | Mechanism locked up | Mechanical lock-up. | ||
| SONY | CCDF35 | Weak torque | Not enough take-up torque. | ||
| SONY | CCDF70 | Broken lens | Lens looked as if twisted hard - breaking stop and af blockunit. | ||
| SONY | CDP707ESD | Missing part number | The part number for the rotor assembly which sits above ref.no. 926 is not listed in the service manual. -hq comments: the part number is the same as listed in the cdp-x7esdmanual. it is a-4675-324-a. | ||
| SONY | CCDF40 | Raggedy vertical edges on straight objects (e.g. doors) | Edges of straight lines looked like line crawl especiallyabout 1/3 center of picture. | ||
| SONY | SL340 | No power | Unit came in with no power on. found defective ic-001. whenremoved ic, i found pin came off and very little or no thermal compoundunderneath ic. i found three units with same problem. | ||
| SONY | CCDV9 | Intermittent door will not close | Intermittent door will not close. dew indicated found poorcontact at cn-001 (fp-57 board). i found two units had same problem. | ||
| SONY | KPR41DS2 | Line in middle of picture, cracked mirror replaced | Dealer received unit and set it up on sales floor. upon ini-tial turn on, he noticed a vertical line running from top to bottom ofpicture. upon further inspection, it was found that the mirror was crack-ed. mirror was not mounted correctly - it was sh | ||
| SONY | TCFX110 | Missing part number | The part number for the flywheel is not shown. -hq comments: the part number is 3-390-806-01. | ||
| SONY | TCWR710 | Eject function not working correctly | I have had three units in the last week with a complaint of(right side eject does not work). the problem comes from the eject lever(ref. no. 54, pg. 24) slipping behind the bracket assembly (ref. no. 10,pg. 23). the repair is simple, but seeing several | ||
| SONY | CDPC500 | Optical assembly bracket | Page 20 of the service manual shows the unidentified bracketsurrounded by reference numbers 107, 106 and 120. service bulletin no. 31indicates the part number is 4-924-445-01. an asc received the part andclaims the tabs on the right side of the drawing | ||
| SONY | CCDF70 | No picture | No picture. | ||
| SONY | CCDF70 | No power | No power. also pertains to serial number 23018. | ||
| SONY | CCDV99 | No power | No power. also pertains to serial number 238547. | ||
| SONY | KPR36XBR | Intermittent loss of memory, por connection t-5002 | Set came into servicers shop with random loss of memory.problem would usually manifest itself as coming on with set tuned tochannel 0 or at full volume. servicer replaced memory ic with no results. | ||
| SONY | D25 | Defective optics | Part of the assembly comes unglued causing no play. the diodeassembly (sensor) is cemented to the optical device. we received threeunits with this problem so far. two assemblies have been forwarded totechnical department for evaluation. -hq comments: | ||
| SONY | RM95 | Modification for test adjustment mode | If you modify the unit as per bulletin no. csv-3, 91, youcannot get into test adjustment mode. |