TV Repair: Common Faults and Solutions.
Search:
Results: 87426
Results: 87426
Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
SONY | D3 | Poor tracking | Unit does not track very well. eye pattern looks very poor. | ||
SONY | KV2080R | Hi pitch squealing, replace l1507 | L1507 causing an objectionable hi pitch squeal. | ||
SONY | SLHFT7 | Not recording audio | Not recording audio on longitudinal track. | ||
SONY | KV1948R | Dead, replace d631 and r603 | R603 fails after one month of operation due to a missing d631on e-1 board from the factory. this is the second unit with this problem. | ||
SONY | CDP110 | Roller guide for chucking arm assy comes off | Roller guide for chucking arm assy comes off. this rolleris a brown one. | ||
SONY | CDP510 | Roller guide for chucking arm assy comes off | Roller guide for chucking arm assy comes off. this roller isbrown one. | ||
SONY | WMF77 | Incorrect part no for fwd idler assy | P/n for ref. 211 page 26 wm-f77 service manual is wrong.p/n x-3335-724-1 is no given, but this same number is also used asref. 233 same page called chassis assy, mechanism. need correct p/n forref. 211 idler assy. | ||
SONY | KPR4150 | No raster, no display, sleep light on | Set would come on with hi voltage, no raster, no display,sleep light on. found 15vdc missing, trouble was traced to l8, 5.6uhchoke opened. | ||
SONY | KV1946R | Dead, replaced c556 | Unit was dead, with an external dc power supply, turned on oscilla-tor, connected variac, brought it up to 70vac, output of oscillator wasgood but to the base of driver distorted. found c556 leaky. (also thehorizontal output had shorted and fuse burned.) | ||
SONY | PCM701ES | Dead unit | Two fuses and transistor bad. replaced parts. all functionsnormal. set unit aside to run. after approx. 3 hrs audio failed thoughmeters still worked. found transistor had gone bad and collector shortedbut on removal of transistor found trace was sti | ||
SONY | SL300 | Broken s gear | Unit came in with broken gear. installed replacement, whichalso broke. -hq comments: i am sending you a new s gear kit. this parts kit will bestocked in the future. | ||
SONY | EVC8U | Need to feed mic input to 12 pin cam connector | Need to feed mic input to 12 pin cam connector. refer topage 96 s/m. cn113, pin 2 mic cn007, pin 7 cam/linehow to switch to mic? -hq comments: this 12 pin connector is a multi-connector with manyapparent applications. there is a serial control l | ||
SONY | LC710 | Need plastic piece on charging strap or complete strap | Customer needs plastic pieces on lc-710 carrying case. -hq comments: this part as well as the strap is not stocked in japan.the part will have to be removed from a case in stock. | ||
SONY | KPR4150 | Inverted image, replace lens, see s/b tvp0302 | In reference to fpr sept 1, the improved green lens wasinstalled. technician informed me there was a 90% improvement. theinverted image had all but dissappeared. he said that in a total darkroom and only with certain screens an inverted image could be | ||
SONY | D3 | Broken printed pattern | Battery won't hold or take charge. | ||
SONY | CCDV8AFU | No rf out | Rf unit had video out but no audio out. | ||
SONY | CCDV110 | No picture in camera mode due to cold solder | No picture in camera mode. | ||
SONY | HVC2200 | Green filter in front of trinicon tube | Customer needs green filter in front of trinicon tube. -hq comments: this is not available. please order a complete trinicontube. | ||
SONY | SL2710 | Service bulletin no. 277 needs revision | Ordered part as per s/b no. 277. part had boss whichinterfered with mechanical chassis. | ||
SONY | CCDV8AFU | Part no for ring in zoom lens ass'y | Need part number for ring at front of zoom lens ass'y. -hq comments: because of the precise optical axis adjustment needed forthe zoom lens ass'y, the assembly is not done in sony factory soreplacement parts are unavailable. |