PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14174
Results: 14174
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 14GL1014 | No image with sound | Replace c2410 100x25v | Resistronic | |
PHILIPS | 14PT3131 | It did not accept commands from the remote control or the pinel even though the receiver was ok | With the device turned on, short circuit at the input, and then I disconnected the power plug, then turned it on and it worked normally | c@rlinhoselectro | |
PHILIPS | 29PT4641 | Dead | 7531, tea 1620. | silva2 | |
PHILIPS | 21PT9467C SK4 0L | Textile factory | Water in the varicose vein | jamil | |
PHILIPS | 14 PT 1563 L6 | Power supply beeps and won't turn on | When turning on it makes a hissing sound in the horizontal area and it doesn't start | Replace the capacitor in position 2423 )330pf 1kv | pastelnata10 |
PHILIPS | 29PT4643 | It doesn't turn on, just the stand by LED blinking | C 2414 shorted, smd. | Replace the 2414. Note: the smallest capacitor I've ever seen. | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 14PT218 | Sizzling sound, good picture | C2227 4n7 smd em curto | C2227 replacement | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 29PT4635 | Alloy generates voltage and cuts immediately | Deflectora | julio itaguai | |
PHILIPS | 21PT5433 | Turning off after 8 seconds on, giving error 11 | Fly back | Fly back | silva2 |
PHILIPS | 21GX1669 GR6-AL | Dark image, only figures can be seen | C 2573(47k) shorted | ESPER | |
PHILIPS | 21GX1669 GR6-AL | Expands and warps the image when changing channels | R 3573(470 r) open | ESPER | |
PHILIPS | DVP-4000 | Read cds and not read dvds | Change the optical unit | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
PHILIPS | 14GL1314 | Takes time to call | C 2351 | ||
PHILIPS | 20PT3336 | Normal power supplys TV turns on and the screen does not light up (kinescope with filament off) then goes into protection mode | Resistors 3343 and 3344 | WAGGUINHO | |
PHILIPS | 20PT3336 | When switching on, flash the stand by LED and then disable the power supply (protect mode) | Transistor 7540 open/replace it | WAGGUINHO | |
PHILIPS | 20PT3331 | Normal power supplys TV turns on and the screen does not light up (kinescope with filament off) then goes into protection mode | Resistors 3343 and 3344 | WAGGUINHO | |
PHILIPS | 29PT4635/78 29PT4635/78 | The bu 808 keeps burning in the fountains | I don't know | marcos | |
PHILIPS | 21PT8467 | With characters and one hundred luminance | R 3442 of 100k open on the abl line | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
PHILIPS | 29PT6566 L04.LAA | Black band on the left side (08 cm) (lack of width on the left side of the screen) | C-2486 | I replaced the c-2486 everything went back to normal | Rogermons This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILIPS | 20PT3331 | The filament turns on and off 3 times and remains off | Q 7491 smd | Dj carlinhos |